Deco E4R (US) Stuck in Yellow LED

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco E4R (US) Stuck in Yellow LED
Deco E4R (US) Stuck in Yellow LED
2020-04-26 19:52:13 - last edited 2020-08-17 12:13:26
Model: Deco E4  
Hardware Version: V1
Firmware Version:

I was trying to upgrade my Deco E4R US using my computer and without checking I downgraded my Deco to an older frimware and now it won't turn on. I was looking for the latest frimware the routher shipped with but cannot found anywhere. Please if anyhow possible send me the latest frimware file. Thank you.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Deco E4R (US) Stuck in Yellow LED-Solution
2020-08-17 12:13:20 - last edited 2020-08-17 12:13:26

@Seba311 

 

Hello,

 

Please try to download the latest firmware from the below website and unzip it, then you will find a .bin file, which is the firmware you need to select when updating:

https://www.tp-link.com/support/download/deco-e4/#Firmware

 

Then refer to the instructions on this link https://community.tp-link.com/en/home/stories/detail/672 to update it.

 

If the problem remains, tell me the error message and we will check it ASAP.

 

Good day.

Please leave me a message if I haven't seen your post and your issue is quite urgent!
Recommended Solution
  1  
  1  
#12
Options
11 Reply
Re:Deco E4R (US) Stuck in Yellow LED
2020-05-12 12:13:07

@AliNurRahman 

What's the firmware have you downgraded to?

How many Deco do you have and do they have solid yellow light?

Please leave me a message if I haven't seen your post and your issue is quite urgent!
  0  
  0  
#2
Options
Re:Deco E4R (US) Stuck in Yellow LED
2020-06-08 10:52:05

@TP-Link_Deco Help. I did the same thing. Can you send the link to the correct the correct firmware?

 

I was able to find this link and followed the instructions: https://community.tp-link.com/en/home/stories/detail/672

I got the router to start blinking yellow and was able to connect using the IP 192.168.0.1

 

The firmware I have downloaded and updated with are:

  1. Deco E4R_V1_190422
  2. Deco E4R_V1_190823

 

Both bricked the router and it was stuck after update and reboot with a solid yellow light. Please help.

  0  
  0  
#3
Options
Re:Deco E4R (US) Stuck in Yellow LED
2020-06-09 15:27:13

@TP-Link_Deco bumping.. please help

  0  
  0  
#6
Options
Re:Deco E4R (US) Stuck in Yellow LED
2020-06-11 12:27:46

@JonathanEngalla 

Hi,

The latest firmware of the Deco E4R is Deco E4R_V1_190823, you can refer to the link below to download the firmware and then unzip it on your computer, you will see a .bin file, it's the firmware you need to select when updating the firmware.

https://www.tp-link.com/support/download/deco-e4/#Firmware

 

And then you can refer to the instruction on the link https://community.tp-link.com/en/home/stories/detail/672 to update the firmware.

 

If the problem remains, what's the error message do you have?

Please leave me a message if I haven't seen your post and your issue is quite urgent!
  0  
  0  
#7
Options
Re:Deco E4R (US) Stuck in Yellow LED
2020-06-11 13:11:06

@JonathanEngalla I got mine replaced from the shop I bought it from.

 

  0  
  0  
#8
Options
Re:Deco E4R (US) Stuck in Yellow LED
2020-06-11 13:17:07

@TP-Link_Deco this is the firmware version that the router comes with and no where on the internet the firmware could be found.

I have wasted i dont know how many hours looking for this firmware version and it is absolutely no where on the internet. Please upload this firmware version. thank you.

  0  
  0  
#9
Options
Re:Deco E4R (US) Stuck in Yellow LED
2020-06-17 09:56:21

@AliNurRahman 

In your case, please keep the current firmware, this firmware is the first firmware on your Deco and it's already the latest one, so you do not need to change the firmware.
If there is a new firmware released, you can update to the new firmware via the Deco app or web UI.
 

Please leave me a message if I haven't seen your post and your issue is quite urgent!
  0  
  0  
#10
Options
Re:Deco E4R (US) Stuck in Yellow LED
2020-08-14 17:57:29

@TP-Link_Deco I have the very same problem. My other Decos E4R (US) in the app say:

 

Firmware Version: 1.4.2 Build 20200727 Rel. 49069.

 

No matter what I do, after the Deco E4R gets the firmware uploaded and applied, then it remains in solid yellow and nothing else happens.

@TP-Link_Deco could you share the link to the latest firmware (that will match my other Decos?)

 

In case you are wondering, I have the 3x packet. 

 

Thanks!

  0  
  0  
#11
Options
Re:Deco E4R (US) Stuck in Yellow LED-Solution
2020-08-17 12:13:20 - last edited 2020-08-17 12:13:26

@Seba311 

 

Hello,

 

Please try to download the latest firmware from the below website and unzip it, then you will find a .bin file, which is the firmware you need to select when updating:

https://www.tp-link.com/support/download/deco-e4/#Firmware

 

Then refer to the instructions on this link https://community.tp-link.com/en/home/stories/detail/672 to update it.

 

If the problem remains, tell me the error message and we will check it ASAP.

 

Good day.

Please leave me a message if I haven't seen your post and your issue is quite urgent!
Recommended Solution
  1  
  1  
#12
Options
Re:Deco E4R (US) Stuck in Yellow LED
2020-08-22 12:10:25

@JonathanEngalla https://www.tp-link.com/my/support/download/deco-e4/#Firmware this is the firmware file that will help you out. Thank me later.

  0  
  0  
#13
Options

Information

Helpful: 0

Views: 2563

Replies: 11

Related Articles