Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi all,
Following the long thread on the same subject discssing the BETA FW, as I said I would, TPLink have given me permission to share the FW download llink.
From TPLink - We recently released a beta firmware for Archer MR600(EU) V1 which can allow us to select 4G+bands for Archer MR600 manually.
https://static.tp-link.com/2020/202004/20200420/Archer_MR600v1_1.1.0_0.9.1_[200417-rel75138]_up_boot_2020-04-20_08.44.31.zip
For Archer MR600, if you want to use its 4G+network, your SIM card should support the CA bands group Archer MR400 supports. Please check the attached picture and check if your SIM card supports the band groups on the list or not.
They asked me to state that, this BETA FW is for the Archer MR600(EU) V1 ONLY!
Neither TPLink nor me take any respnsbility if you flash a none-EU router.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
You can update up and down as you want :)
- Copy Link
- Report Inappropriate Content
but for change bands on TL-MR6400 v3 ?????
- Copy Link
- Report Inappropriate Content
@Ravi-Bajaj ah thanks for confirming 
Ravi-Bajaj wrote
Yes i have first updated to latest version and then gone to Beta version and again vice versa😅😅
- Copy Link
- Report Inappropriate Content
https://community.tp-link.com/en/home/forum/topic/166506
magico111 wrote
but for change bands on TL-MR6400 v3 ?????
- Copy Link
- Report Inappropriate Content
@john.awad Gone...
- Copy Link
- Report Inappropriate Content
@Nevsie Are you sure? I connect to the same mast... I think.
- Copy Link
- Report Inappropriate Content
I guess it is possible to connect to the same transmitter twice... but you would still be sharing that transmitters bands bandwidth right?
Is it possible the same mast has two transmitters on the same band?
If you can get band 3 from one mast, and another band 3 from another mast, then it is possibe the same mast could have two transmitters on band 3 for your provider... maybe directional... then you could get 3,3 from the same mast...
This is all based on logic, I do not know if it is possible, or whether they do this.
All i know is, i have line of sight to one mast, and i get 100% signal, but a single band 3 connection. It never doubles up for LTE
- Copy Link
- Report Inappropriate Content
Me too, mine only gets connected to one band 3, even if selected band 3 on both channel. Will test it at different location over the weekend. Would be great if it gets connected two same bands and double up the speed, maybe it's wishful thinking. Anyone here able to connect to two same band?
Nevsie wrote
I guess it is possible to connect to the same transmitter twice... but you would still be sharing that transmitters bands bandwidth right?
Is it possible the same mast has two transmitters on the same band?
If you can get band 3 from one mast, and another band 3 from another mast, then it is possibe the same mast could have two transmitters on band 3 for your provider... maybe directional... then you could get 3,3 from the same mast...
This is all based on logic, I do not know if it is possible, or whether they do this.
All i know is, i have line of sight to one mast, and i get 100% signal, but a single band 3 connection. It never doubles up for LTE
- Copy Link
- Report Inappropriate Content
@darant Why cant we use bands 3+1 ? In huawei we can.
- Copy Link
- Report Inappropriate Content
@Cozzer101 I may be too late for this reply as I've only just joined the community... looking for answers to these common issues, specifically loss of connection at random intervals.
Yes, I've tried the latest and greatest firmware (didn't fix the issue), then the Beta version discussed in this thread (which fixed the problem, but made the UI ugly), then back to the last firmware (the problem returned)... and finally I've settled on the Beta version ( 1.1.0 0.9.1 v0001.0 ) and I'll live with the ugliness. No connection loss for a whole day!
No issues with installation at any time.
My hardware is reported as Archer MR600V1, I'm operating in '4G only' network mode in France, with 'Manual' network search on Bouygues. Band A is set to 'Band3' and Band B to 'Band20'.
I hope this helps.
Cheers... Paul
- Copy Link
- Report Inappropriate Content
Information
Helpful: 13
Views: 194980
Replies: 511
Voters 10
