Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi all,
Following the long thread on the same subject discssing the BETA FW, as I said I would, TPLink have given me permission to share the FW download llink.
From TPLink - We recently released a beta firmware for Archer MR600(EU) V1 which can allow us to select 4G+bands for Archer MR600 manually.
https://static.tp-link.com/2020/202004/20200420/Archer_MR600v1_1.1.0_0.9.1_[200417-rel75138]_up_boot_2020-04-20_08.44.31.zip
For Archer MR600, if you want to use its 4G+network, your SIM card should support the CA bands group Archer MR400 supports. Please check the attached picture and check if your SIM card supports the band groups on the list or not.
They asked me to state that, this BETA FW is for the Archer MR600(EU) V1 ONLY!
Neither TPLink nor me take any respnsbility if you flash a none-EU router.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
when we can get official firmware for MR600 V1 with Band selection option.
I can understand the latest beta is below one.. if not, pls share updated one meanwhile. Thanks
Archer MR600(EU)_V1:
- Copy Link
- Report Inappropriate Content
this is not a beta? always has the selection of bands?
- Copy Link
- Report Inappropriate Content
We have reported this to the R and D team, and will push them to release a new official firmware to fix the band selection feature you are requesting. Please keep an eye on the official website for any new firmware updates.
- Copy Link
- Report Inappropriate Content
Lo terrò d'occhio ma You, if you can, report qui se qualche aggiornamento ufficiale è buono per la selezione delle band.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello to everyone.
Same needs here... Could you please link me last beta firmware with this feature enabled for MR600 v1 ?
I wouldn't want to flash wrong version since I work with internet (as many in this period).
Thank you
- Copy Link
- Report Inappropriate Content
Here it is:
Archer MR600(EU)_V1:
Note: Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.
- Copy Link
- Report Inappropriate Content
just for information: even you can select 2 bands. that doesnt mean they will stay. im facing issues for band 20+3. after about 1 hour its automatically switching to 3+3.. (country: austria - provider: a1 telekom)
- Copy Link
- Report Inappropriate Content
Just wandering, if you put this SIM card into a phone, or into another LTE router, will it work at band 20+3 stably?
Are there other band selection available in the a1 telekom network?
- Copy Link
- Report Inappropriate Content
Today I flashed beta firmware provided. Initially it worked as expected but the situation now is the following
The chosen frequency bands are reversed resulting in a performance drop (band 7 is the one that offers the best download performances).During time I found that my sim works with following bands: 7,3 3,7 20,1 20,3 Any Idea how to fix this?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 13
Views: 174798
Replies: 511
Voters 10
