RE305 AC1200 Dual-Band Wi-Fi Range Extender not able to connect to Airtel 5G broadband
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Extender does not detect 5G internet connection from primary router. 5G signal LED is switched off and unable to scan 5G network from TPlink admin page also. However it detects and connects successfully with 2.4GHz channel. This is strange as all other devices like laptop, phones able to connect on 5G primary network connection of AIrtel broadband. Pls suggest solution. I have tried all basic troubleshootings, factory reset extender, tried with WPS, manual configuration and also 5G without security does not work.
RE305 AC1200 Dual-Band Wi-Fi Range Extender
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello everyone,
If range extender does not see router's 5Ghz WiFi signal, please try some tips in below thread and change router 5Ghz channel to 36/40/44/48 :
[Troubleshooting] TP-Link Range Extender is not detecting the 5GHz Signal of the Main Router
Here is another thread discussing on the same topic:
https://community.tp-link.com/en/smart-home/forum/topic/211958
- Copy Link
- Report Inappropriate Content
To All,
Here is the SIMPLE thing to fix the problem. Took me some time but I was able to fix the issue.
1. If there is OneMesh setting (Available in selected Routers like AX10) from your Parent Router. Disable it.
2. Go to Wireless settings of your Parent Router and set the 5GHz wireless network "Channel" to 48 and save it.
3. Setup the 2.4 and 5G wireless SSIDs for your extender.
4. Connect your Phone or Laptop with Extender network.
5. Now login to http://tplinkrepeater.net/ using your TPLINK login id and password.
6. Go to Wireless > Connect To Network > Enable the 5GHz Network and start scan for Wireless Scanner. It should show you now your 5Ghz wireless network from your Parent Router.
7. Select your network and save it.
8. Extender will reboot and 5GHz led will light up.
9. (Optional) Now you can Enable the OneMesh again.
That is it :) All the best.
- Copy Link
- Report Inappropriate Content
I also have the same issue, just bought it yesterday. But the RE305 is detecting 2.4 only. It is not able to detect 5GHz.
I have Airtel Xtream Fibre connection ( 1Gbps )
@chirag_shah : One thing i notice your firmware version is old. Upgrade to latest and check does it work for you.
I upgraded but didnt work for me.
my build details : 1.1.2 Build 20200212 Rel. 67183
- Copy Link
- Report Inappropriate Content
I think the problem is the wireless band setting. Its needs to band 1. Now issue here is we cannot change the band in Huawei Router. If you are able to please try and let me know how did you do it.
Read this - a reply from TP Link only to someone with same problem...
Re:Not able to connect AC1200 to 5G network
@JoseRivera 5G channel 136 is one of band3, and it's DFS channel, and RE305 does not support that one.
I’m afraid that you need to contact the router support to change the 5G channle to band1: 36,40, 44, or 48.
- Copy Link
- Report Inappropriate Content
It is resolved for me and extender connects to 5G now. I logged a ticket with Airtel and thier engineer resolved the issue over call. He changed 5G channel remotely.
- Copy Link
- Report Inappropriate Content
Can you kindly share, how did you raised a ticket with Airtel?
- Copy Link
- Report Inappropriate Content
I had a similar issue, wherein I was able to view and set the 2.4GHz one but was unable to even view the 5GHz mode for repeater.
Raised a request with Airtel. The technician set the band to 36 on the Huawei router, and the issue was resolved.
- Copy Link
- Report Inappropriate Content
Hi,
Try changing the Channel of your Host Router (Modem) to 36, it must be above 100 or 150 by default which this TPlink 305 does not support.
To change the channel login through your laptop/desktop using your host provides credentials.
Hope this helps!!
Regards,
Harsh
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, actually I have jio connection so did the same channel change and the extender worked for me.
What you can do is log-in to the modem gateaway page through a laptop or pc and then in the search option type "basic configuration for 5G" and you will get the channel change option in that column. It must be auto by default, select it under 48 and follow the procedure for connecting tp-link extender for 5G.
Hope it will work for you!!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Good day,
Have you tried to change the wireless channel of the 5Ghc to be band 1( channel 36- 48) to have a try？
And may I know the model number or your home router?
Thanks a lot.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 9189
Replies: 21
Voters 0
No one has voted for it yet.