Deco P9 WPA Disable
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I have come to swap some equipment on to my Deco P9 mesh network, but on the equipment the wifi shows up as WPA-PSK TKIP.
Considering how new the P9 is and how insecure the WPA protocol is, I don't want to advertise my SSID using these settings.
Could you confirm:
Is the P9 allowing connections using this insecure protocol?
Is there anyway of forcing the P9 to use WPA2 AES and disable WPA?
I do not feel my network is secure if WPA is being used and want to force all wireless connections to use WPA2.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Zorki48 @crayuk @Mart71 @LaMpiR @JonK @Hook @unicaller @Zorki48
Hello,
We have released the beta firmware for the Deco device to allow you to change the security type now, please refer to the below post for more details:
https://community.tp-link.com/en/home/forum/topic/227662
Thanks a lot~
- Copy Link
- Report Inappropriate Content
Deco support WPA-PSK and WPA2-PSK at the same time, currently, there is no option to fix the security type.
We will record the inquiry and then forward to the product team to evaluate, please wait patiently, and if there are any updates, we will upload it to the official website.
- Copy Link
- Report Inappropriate Content
This is a shocking omission.
WPA is known to be extremely weak and has been for several years. The fact that I cannot disable this makes me feel so uncomfortable with the P9, I am seriously considering returning them.
I've had routers that are years old with the option of setting the security type and the fact I can't do it on these, and they are by default using a weak standard that can be cracked in a matter of minutes, is shocking.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
wait a minute, what? It uses both at the same time? A router from 2020 is broadcasting network with WPA protocol being used?
I cannot believe this honestly. I am thinking about returning them only because if this. How is this even possible?
- Copy Link
- Report Inappropriate Content
Yes, I agree.
I find it completely unacceptable that in 2020 a router exists that, by default, uses both WPA and WPA2 without giving the user the option of changing it.
By default, it should be WPA2-AES, with the option and suitable warning, if the user decides to choose a different protocol that is insecure. Having insecure protcols turned on by default, with no option to turn them off, is just awful design.
@TP-Link_Deco would it be possible to get a suitable response to this and a timeline on if this will be patched in order to make this more secure?
- Copy Link
- Report Inappropriate Content
Made a suggestion and got an reply. They are sorry that I am unhappy with their products because of this and they will forward my suggestion. Not what I expected.
- Copy Link
- Report Inappropriate Content
I cannot believe this! We are really not able to turn off the insecure WPA protocol, which was superceded by WPA2 in about 2006? Having just spent £££ on what I thought was a top-of-the-range system, I may now return this because of this poor level of security. Even the cheapest wifi routers offer better than this.
Come on TP-link: do something about this with a rapid upgrade.
- Copy Link
- Report Inappropriate Content
Yes, I agree.
This needs to be fixed as soon as possible.
I still can't believe it does this by default and even more so that there isn't an option to turn WPA off completely.
- Copy Link
- Report Inappropriate Content
Basically my ISP Router has more options in WiFI department than P9 which costs 10x more.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 6283
Replies: 26
Voters 3
