AC-750 Wi-Fi Range Extender

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AC-750 Wi-Fi Range Extender
AC-750 Wi-Fi Range Extender
2020-06-22 11:38:59 - last edited 2020-06-23 07:25:43
Model: RE200
Hardware Version: V4
Firmware Version:

Hi,

 

I bought this device to extend my wireless signal.

As I saw there is an ethernet connection, I thought this would be suitable since I have an ethernet cable through the wall from my router all the way to my dead zone.

After buying the device I figured that the ethernet port is meant to connect a device without wifi capabilities and not to extend the signal from the router.

Unfortunately, I don't have a power outlet closer to the router to extend it over wifi, I specifically wanted to extend the wifi signal over LAN.

 

Is there any way to change the role of the ethernet port? Instead of being an output source to other devices, turning it into an input to get a signal to the device itself?

 

Thanks

0
0
#1
Options
1 Accepted Solution
Re:AC-750 Wi-Fi Range Extender-Solution
2020-06-23 01:25:29 - last edited 2020-06-23 07:25:43

@uriel1987 

 

Hi, you may change the RE200's working mode to an Access Point, here is the guide:

How to configure the range extender as an access point

 

Then plug it onto the Ethernet LAN cable to extender the internet.

Recommended Solution
0
0
#2
Options
3 Reply
Re:AC-750 Wi-Fi Range Extender-Solution
2020-06-23 01:25:29 - last edited 2020-06-23 07:25:43

@uriel1987 

 

Hi, you may change the RE200's working mode to an Access Point, here is the guide:

How to configure the range extender as an access point

 

Then plug it onto the Ethernet LAN cable to extender the internet.

Recommended Solution
0
0
#2
Options
Re:AC-750 Wi-Fi Range Extender
2020-06-23 05:52:37

@Solla-topee 

 

Thanks a lot for your answer! Appreciate it!

Works!!

0
0
#3
Options
Re:AC-750 Wi-Fi Range Extender
2021-04-23 04:35:48

 

uriel1987 wrote

Hi,

 

I bought this device to extend my wireless signal.

As I saw there is an ethernet connection, I thought this would be suitable since I have an ethernet cable through the wall from my router all the way to my dead zone.

After buying the device I figured that the ethernet port is meant to connect a device without wifi capabilities and not to extend the signal from the router.

Unfortunately, I don't have a power outlet closer to the router to extend it over wifi, I specifically wanted to extend the wifi signal over LAN.

 

Is there any way to change the role of the ethernet port? Instead of being an output source to other devices, turning it into an input to get a signal to the device itself?

 

Thanks

@uriel1987 

0
0
#5
Options