Early Access Deco X50/X50Pro/X50-PoE Pre-Release Firmware 1.7.0 Introduces DoH/DoT, Channel Selection, and More!
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Update on July 25, 2026:
The official firmware version for Deco X50/X55/X3000_V3.0, Deco X55 Pro/X50 Pro_V1.0, and Deco X50-PoE/HB6300-PoE_V2.0 has been released publicly. Users can check for updates via the Deco's web interface or through the Deco App to install the latest version manually.
How to Update TP-Link Deco Firmware
If you cannot find the latest firmware version, please download the firmware from the link below and upgrade it manually:
1.7.0_build_26050812_rel21531
We will manually lock this post to better focus on discussions regarding the new firmware. Please feel free to start a new thread here if you need assistance.
Best Regards
-----------------------------------
Hello Everyone,
We're excited to share early access to a new firmware update for the following Deco models, packed with new features and enhancements designed to elevate your Deco Mesh Home Networking experience. This firmware is currently in beta; however, your testing and feedback may help accelerate its official release!
This Article Applied to:
Deco X50/X55/X3000 V3.0
Deco X55 Pro/X50 Pro V1.0
Deco X50-PoE/HB6300-PoE V2.0
Firmware Modifications:
New Features/Enhancements:
- Added support for WireGuard VPN and third-party VPN
- Added the IoT network connection preference feature
- Added the client identification feature
- Added the LED schedule feature
- Added support for IPv6 configuration during setup
- Added the Internet Backup feature
- Added the DoH/DoT feature
- Added the Wi-Fi channel selection feature
- Improved the performance and stability of multiple Deco units operating within the network
- Enhanced the QoS performance
- Enhanced the Smart Home performance
- Enhanced the Homeshield parental control performance
- Enhanced the client list performance in the Deco APP
- Improved overall security and stability
Firmware Download Link:
| Deco X50/X55/X3000 V3.0 Deco X55 Pro/X50 Pro V1.0 Deco X50-PoE/HB6300-PoE V2.0 |
1.7.0_Build_26050812_Rel.21531(Pre-Release) |
Notes:
- Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
- Please ensure your Deco app is fully up-to-date.
- This firmware cannot be reverted directly to the previous version. A Firmware Recovery Process is required to revert.
- There will be an official firmware release in the future. If you are not comfortable using beta firmware, please wait for the official release or contact our support teams for assistance.
- For detailed instructions on how to install this beta firmware on your Deco Mesh System, visit: How to manually update the firmware via web UI.
As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.
- Provide a detailed network layout, including how the devices are connected.
- Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.
Thank you for your continued support and for being part of our community.
Hi @Solla-topee, Team,
I had a chance to update my X50-POE last weekend and run several tests.
1. Connecton was stable - My old ricoh printer connected without isses, old Dell notebook, Macbook, iPhone, Samsung phones connected without issues (2,4 and 5GHz)
2. As I reported issues and need with Singnal strengh indicator and values I focused mostly on that part.
A) signal indicator presenting the signal between deco nodes looks fine / works fine, but I did not have chance to move the nodes to much: -77dBm seems to be right in my setup.: (by defult connected with ethernet)
B) I noticed issue with reporting device's signal ,wireless bandwidth and encription connected to X50-POE:
-82 or 124 dBm does not looks like "strong signal :) "
No issues with devices connected to main X50 (latest 1.8 firmware)
@Solla-topee
1.
2.
3. I did not take the screenshots for iPhone and I am away from that network but for S25 please find my last comment "No issues with devices connected to main X50 (latest 1.8 firmware)" and pictures below it
Hi @Solla-topee
I updated my main X50 deco using the FW provided via PM but it does NOT help with clients info and statitics connected to X50-POE.
FW info:
X50-POE (name Kominek) still has isses with signal and wireless details:
- iPhone:
Samsung - signal 124dBm :) :
The same devices when connected via main X50:
IMO there is nothing to do with X50 FW - even the ofccial release 1.8.0 is/was fine - The issue still seems to be 1.7.0 X50-POE related
