Home Network Community > Wi-Fi Routers > Disconnecting problem TL-WR702N
< Wi-Fi Routers

Disconnecting problem TL-WR702N

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Disconnecting problem TL-WR702N

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Disconnecting problem TL-WR702N
Disconnecting problem TL-WR702N
2020-08-24 02:06:02 - last edited 2020-08-26 08:46:26

My TP-Link WR702N is powered on almost continuously for more than five years in router mode. Firmware is the latest.

About six months ago FaceTime video calls began to have low voice quality at the receiving party and to disconnect every 10-20 min. More recently noticed the 4G symbol on my iPhone to re-appear at disconnection event. Then my wife began to complain could not work anymore from the home office. Rebooting was the solution.

Most recent logs as follow:
 

 

400​

INFO​

333663 : DHCPS: 1:0x807d3a1fb0be, 192.168.0.100, ACK in request.​

399​

INFO​

333310 : DHCP client read, totlen = 368(1048).​

398​

INFO​

333001 : DHCPS: 1:0x1093e904d5f2, 192.168.0.106, ACK in request.​

397​

INFO​

332410 : DHCP client read, totlen = 368(1048).​

396​

INFO​

332167 : DHCPS: 1:0x94bf2dd568b0, 192.168.0.101, ACK in request.​

395​

INFO​

331582 : DHCPS: 1:0x84ad8d7ffeb6, 192.168.0.103, ACK in request.​

394​

INFO​

331510 : DHCP client read, totlen = 368(1048).​

393​

INFO​

331238 : DHCPS: 1:0xb0481a600557, 192.168.0.102, ACK in request.​

392​

INFO​

330610 : DHCP client read, totlen = 368(1048).​

391​

INFO​

330063 : DHCPS: 1:0x807d3a1fb0be, 192.168.0.100, ACK in request.​


Have no idea why timestamps are missing.

DHCP Clients List with five clients checks out. So I assume no intrusions in my home network. 

Logs appear to be rudimentary (no more than 400 lines, re-boot events not logged and thus who knows what else is missing) and I don't know how to interpret them anyway. How to troubleshoot? Thanks.

  0      
 
  0      
 
#1
Options
5 Reply
Re:Disconnecting problem TL-WR702N
2020-08-26 03:32:24 - last edited 2020-08-26 05:56:24

@Wu-Ming2 

 

Hello,

 

So the current issue is that the wireless connection will lose the internet, and you need reboot the router to make it work, while the wired device still works well, right? 

 

You still can see the wireless network name but failed to connect to them with the error message, is there any error message? 

 

Try a mobile app to analyze the WiFi around you, review all the wireless channels. Next, review the wireless channels on the router. If the channels match that around you, an indication of overcrowded. Manually adjust the channels to lesser use channels.

 

There are possibly other wireless parameters that need tweaking, such as Power Transmit, narrow or wide band, etc. but start with the above and below link:

https://community.tp-link.com/en/home/forum/topic/200588​​​​​​​

 

May it help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Disconnecting problem TL-WR702N
2020-08-26 05:19:54

@Kevin_Z 

 

Hello,

 

So the current issue is that the wireless connection will lose the internet, and you need reboot the router to make it work, while the wired device still works well, right? 

 

Yes.  As mentioned both iPhone and laptop (home office) are having issues with the internet.  Also a WiFi connected air quality monitor once every 1-2 days notifies was not able to upload for 10-20 minutes.  While wired TV was still able to stream Netflix.

 

You still can see the wireless network name but failed to connect to them with the error message, is there any error message?  

 

Yes and no.  Most of the times I could still see the SSID but no error message as far as I know.  Sometimes SSID disappeared.  It may have happened all the times but I didn't check.  FaceTime simply notifies of "poor connection" and laptop stops loading items from the internet.  As shown in my opening message TP-LINK log doesn't show any error.  Any way to obtain a full log from WR702N?

 

Try a mobile app to analyze the WiFi around you, review all the wireless channels. Next, review the wireless channels on the router. If the channels match that around you, an indication of overcrowded. Manually adjust the channels to lesser use channels.

 

Not clear.  My Mac lists 16 additional SSIDs other than my own.  It's a tall building.  Isn't clear what else should I do on router to "review and adjust" channles.  Please advise.

 

There are possibly other wireless parameters that need tweaking, such as Power Transmit, narrow or wide band, etc. but start with the above and below link:

https://community.tp-link.com/en/home/forum/topic/200588​​​​​​

 

I checked against all steps mentioned in the liked forum message.  We have on average of five devices connected to WiFi and problems began to emerge only about six months ago.

  0  
  0  
#3
Options
Re:Disconnecting problem TL-WR702N
2020-08-26 08:10:23 - last edited 2020-08-26 08:46:26

@Wu-Ming2 

 

Hi, thanks for getting back quickly.

 

You may download a software called wifi analyzer to review all the channels around you, then try to change to a less-crowded channel on the router to give it a go:

https://www.microsoft.com/en-us/p/wifi-analyzer/9nblggh33n0n?activetab=pivot:overviewtab

 

Below is the guide to change the channel and channel width on the router:

https://www.tp-link.com/support/faq/2292/

 

Meanwhile, try to change the WAN DNS setting on the WR702N to 8.8.8.8 and 8.8.4.4, then reboot the router and monitor.

 

May it help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:Disconnecting problem TL-WR702N
2020-08-26 08:56:55

@Kevin_Z 

 

Hello,

 

You may download a software called wifi analyzer to review all the channels around you, then try to change to a less-crowded channel on the router to give it a go

 

I have only Apple devices: any other option?

 

Also I understand your concern is channel interference from nighbourhood's routers.  But less than once a day and mostly while on FaceTime?

 

Regards.

  0  
  0  
#5
Options
Re:Disconnecting problem TL-WR702N
2020-08-27 01:15:23

@Kevin_Z 

 

Hello,

 

forgot the Mac has bult-in Wireless Diagnostics with WiFi scanner.  I am the lone user of a channel. 

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 876

Replies: 5

Related Articles
 TL-WR702N Problem...
2378 0
How do I set up my TL-WR702N as a bridge ?
644 0
 Tl-wr702n
349 0
 Tl-wr702n
535 0
 tl-wr702n and Android 7.0 connection problem
759 0
 No idea what I am doing TL-WR702N
910 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.