Solution Weak secuirty issue on the IOS system
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Background:
Some of you may have updated your Apple devices to the latest iOS 14 version and get a “Weak Security” warning message when connecting to the Deco network.
Why Deco network is displayed as “Weak Security”?
Deco by default secured your wireless network with a mixed WPA/WPA2-AES/TKIP security, and the previous firmware was not allowed to manually configure the security mode. While iOS14 and some new operating systems consider other than the latest WPA3 and WPA2 AES to have security issues.
Solution:
1. The latest firmware version has allowed users to manually configure the security mode; Please make sure that you have updated Deco to the latest firmware;
2. Please ensure you are running the latest Deco app on your phone;
Then Launch your Deco app->MORE->Wi-Fi, tap the password box and you will be able to change the Security Type:
Note:
1. Sometimes Deco APP might fail to get the latest firmware upgrade notification, please also check on the local official website to ensure you have the latest firmware;
2. After changing the security mode to WPA2-PSK (AES) only, If some of your old IoT devices cannot connect to the Deco network anymore, you could change the security back to the mixed WPA2-PSK (AES)+WPA-PSK (TKIP) as your devices might not support the newer AES version.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello,
As for the beta firmware for the Deco M3W, our developers are still working on it.
As a workaround, you may update your Deco P7 to the new beta firmware, which we have released a day ago in this thread, and it will allow you to change the wireless security even though the M3W is on:
Deco P7_V1: https://static.tp-link.com/2020/202009/20200921/Deco_P7_V1_1.4.9.zip
Thanks.
- Copy Link
- Report Inappropriate Content
Hello, sorry for any confusion caused by the newer beta.
Previously, we received customer feedback that there is a Deco M3W in his Deco network and he was not able to get the option to change the wireless security on his Deco app, so we have updated the beta firmware now to allow those who may have different models in the same Deco network to change the wireless security even though some Deco devices don't support it.
If the Deco devices in your network have already got the beta firmware, there is no need to update this new one, thanks a lot~
- Copy Link
- Report Inappropriate Content
Hello!
Ok I can confirm, the beta firmware 1.4.9 for the Deco P7 with an integrated M3W (1.0.5) still shows the security settings :)
Thanks
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, what is the model number of your Deco device? Have you updated to the corresponding beta firmware already? Thanks.
- Copy Link
- Report Inappropriate Content
@TP-Link_Deco Is an update for the Deco M3 forthcoming? I just installed a new one along with two M3W's. Thanks.
- Copy Link
- Report Inappropriate Content
@TP-Link_Deco I was able to upgrade my Deco M9 Plus V1 to Beta version 1.4.3. However, Have been only able to upgrade my Deco M9 Plus V2 to version 1.4.2.
When I try to upgrade using the file contained in Deco M9 Plus_V2: https://static.tp-link.com/2020/202009/20200922/Deco_M9Plus_V2_1.4.3.zip I got an error message that this firmware is older than the one already installed in the Deco M9 Plus V2, It seems this beta is just version 1.4.0
WHat should I do?
- Copy Link
- Report Inappropriate Content
@WillemZegers i need the official firmware update for the to-link. decoM4R. V2 . Wpa2/3. Aes. Can you give a release date?
- Copy Link
- Report Inappropriate Content
Everything works as you instructed in my Deco M9 Plus V2 from Windows 10.
I was having the annoying message about weak security, but it was gone after forget/reconnect to the Wi-Fi without upgrade to beta firmware.
Anyways, I upgraded for fun 
, here are my notes regarding the firmware upgrade using the Upgrade Utility (Windows 10).
Upgrade Utility works only after disabling all (virtual and local) network interfaces and leaving only enabled the Wi-Fi as advised here:
https://www.tp-link.com/de/support/faq/2930/
I upgraded via Wireless, checking that I was connected to main Deco as requested but not explained "How" in the PDF inside the ZIP firmware file:
Deco M9 Plus_V2: https://static.tp-link.com/2020/202009/20200922/Deco_M9Plus_V2_1.4.3.zip
To check to which Deco you are connected go to Deco App > Overview > Network Devices > "Your Device" > "Gear Symbol" > Linked Deco.
The final result in my case is shown in the next image:
- Copy Link
- Report Inappropriate Content
Information
Helpful: 10
Views: 101223
Replies: 145
Voters 10
