Web interface is broken as a result of incorrect firmware update

Web interface is broken as a result of incorrect firmware update
Web interface is broken as a result of incorrect firmware update
2020-09-19 00:49:53
Model: RE200
Hardware Version: V4
Firmware Version:

I have the TP-Link r200 ac750 V4 router extender . The interface is broken because I installed the wrong version. It scans 2.4G networks, but when you click next, nothing happens and it freezes. It does not provide access to the interface without resetting again. I am unable to install the correct version as I cannot access the interface. What should I do? I tried to install with tftp but failed because tftp cannot detect the device.

0
0
#1
Options
1 Reply
Re:Web interface is broken as a result of incorrect firmware update
2020-09-23 03:21:27

@canca 

Good day.

Sorry for the delay.

Have you tried to connect the computer via Ethernet cable to RE200?

And after reset RE200, once log in via http://tplinkrepeater.net /or 192.168.0.254, please go to settings, instead of quick set up; then go to system tools to manually upload the correct firmware to see if the range extender could be updated;

https://www.tp-link.com/support/download/re200/#Firmware

By the way, where are you located and how long have you had the RE200?

Thank you very much.

Best Regards.
0
0
#2
Options