Home Network Community > DSL Modem Routers > Using Archer VR2800 as a Wifi Router
< DSL Modem Routers

Using Archer VR2800 as a Wifi Router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Using Archer VR2800 as a Wifi Router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Using Archer VR2800 as a Wifi Router
Using Archer VR2800 as a Wifi Router
2020-09-30 13:29:06
Model: Archer VR2800  
Hardware Version: V1
Firmware Version: 0.5.0 0.9.1 v006c.0 Build 200710 Beta.50656n

Hello guy, so 

 

After failing to get a solution for my newly bought Archer VR2800 disconnecting from ISP on a regular basis, I have decided to use the same as a Wifi Router instead of DSL modem router & brought back my Linksys X1000 and using it as a modem. Now, VR2800 will not connect to internet (forgive me ignorance, my other wifi router Buffallo just did that!) so that I can connect to TP-link cloud for DDNS and other router specific activities. 

Under the LAN settings, I cannot see a gateway or dns settings specific for the VR2800 until. How I will make the VR2800 to connect to internet?

 

Regards,

 

  0      
 
  0      
 
#1
Options
9 Reply
Re:Using Archer VR2800 as a Wifi Router
2020-10-03 07:08:22

@rajthampi 

Good day.

Thank you very much for your time and patience.

Who is your internet service provider and what kind of internet connection type does it require?

Did you set the Linksys X1000 as a pure modem or modem router?

---if it is pure modem, the internet connection type on VR2800 would use the connection type from the internet provider, such as PPPoE connection;

---it it is the modem router, the connection type is just dynamic IP;

 

Thanks a lot.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Using Archer VR2800 as a Wifi Router
2020-10-04 09:17:33

@Sunshine Hello, Thank you very much for the reply. Well Linksys x1000 is another DSL modem router & I am using it only as a modem (no specific modes for using the router as Modem only is available) by disabling the wifi on it.

My ISP doesn't support PPPoE. We are using PPPoA instead. My ISP is KEMS Zajil, Kuwait.

 

Please let me know whether additional details will help this situation.

 

regards,

  0  
  0  
#3
Options
Re:Using Archer VR2800 as a Wifi Router
2020-10-04 09:23:36

@Sunshine on another note, your AE support site has a BETA version of firmware uploaded as latest firmware. Is it possible for you to update the same with release candidate? Thank you!

  0  
  0  
#4
Options
Re:Using Archer VR2800 as a Wifi Router
2020-11-05 06:32:39

@Sunshine Any updates? It's over a month I am waiting for a response against my query!

 

Thanks

  0  
  0  
#5
Options
Re:Using Archer VR2800 as a Wifi Router
2020-11-05 06:37:20

@Sunshine 

 

I'm still trying to digest these suggestions!

 

---if it is pure modem, the internet connection type on VR2800 would use the connection type from the internet provider, such as PPPoE connection;

 

We use PPPoA here in Kuwait & My Linksys Router x1000 is already connected to ISP

 

---it it is the modem router, the connection type is just dynamic IP;

 

Okay, so I take a LAN out from Linksys x1000 and connect it to VR2800's LAN4/WAN port and select internet connection as dynamic IP?? Please clarify!

 

 

  0  
  0  
#6
Options
Re:Using Archer VR2800 as a Wifi Router
2020-11-14 03:26:39

@rajthampi 

Good day,

Sorry for the delay.

Yes, you are right and Archer VR2800 should be in wireless router mode with dynamic IP internet connection type.

and as for the firmware, as long as you are on the same region code, such as EU, UN, you could try to update the beta firmware.

Really sorry for the inconvenience.

Waiting for your reply.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#7
Options
Re:Using Archer VR2800 as a Wifi Router
2020-11-14 07:41:27

@Sunshine The sole ray over the community horizon, salute! Well buddy, I am using a ADSL modem router for the connection and using your device as a wifi router that wouldn't connect to internet so that I can connect to DDNS or other internet based services.

Now, your suggestion only works if I am using a pure MODEL for establishing the ADSL connection.

 

Any other suggestions?

 

  0  
  0  
#8
Options
Re:Using Archer VR2800 as a Wifi Router
2020-11-24 09:47:58

@rajthampi 

 

Hello, sorry to respond late.

 

Please refer to the below instructions to switch the VR2800 into a wireless router:

https://www.tp-link.com/support/faq/1731/

 

But firstly, please ensure you have internet access when connect a PC directly to the Linksys X1000. You may show me what is the IP address you can get when the PC is directly connected to the Linksys X1000.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#9
Options
Re:Using Archer VR2800 as a Wifi Router
2020-11-24 10:12:46

@Kevin_Z Hello there

 

Well, Linksys x1000 is another DSL Modem router that connects to ISP. The instructions available with the reference document you pointed is irrelevant to me as my ISP uses PPPoA for the link.

My x1000 DSL modem router has 192.168.1.1 and I have the LAN IP address for VR28000 setup as 192.168.1.1 and connected to one of the LAN ports available with x1000 & VR2800 is currently set as the DHCP server.

 

Well, it does forward the requests to 192.168.1.1, the gateway and all my connected clients can connect to the internet, but VR2800

 

I need a solution for it.

 

Thank you for you reply.

  0  
  0  
#10
Options

Information

Helpful: 0

Views: 2483

Replies: 9

Related Articles
Archer VR2800 router loses power
2927 0
Archer ax11000 wi-fi 6 compatible with archer vr2800
1627 0
 using VR2800 as an extender
922 0
Failure to set up Archer VR2800
1006 0
Archer VR2800 & Virgin Hub3
1140 0
VR2800 Wireless Router Mode - MER
2197 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.