TP-Link Community > Kasa Smart Bulbs > Smart bulb brightness
< Kasa Smart Bulbs

Smart bulb brightness

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Smart bulb brightness

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Smart bulb brightness
Smart bulb brightness
2020-10-18 11:22:10 - last edited 2020-11-02 22:07:32

I'm considering the purchase of some L510B smart bulbs.

I have read that the default brightness can be set to 1%, which, if I have understood correctly, means that it will come on at this level after a power cut.

With the default set to 1% is it possible to have the lights come on at a set time of day at a different brightness, without affecting the default?

I plan to set the bulbs to come on at different times when I'm away, but if there is a power cut I don't want them to light up the house if they are not scheduled to be on.

I can't find any instruction manuals on line that detail the settings. I assume I'll get some with the bulbs.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Smart bulb brightness-Solution
2020-11-02 22:07:26 - last edited 2020-11-02 22:08:05

I have now purchased the bulbs and they do work as I require. i.e. they can be set to 1% default for when the power is lost and returned, and they can be set to come on at a specific brightness using the the schedule, irrespective of the default.

Recommended Solution
  2  
  2  
#4
Options
3 Reply
Re:Smart bulb brightness
2020-10-20 10:41:05

@Graham35p 

Good day,

Thank you very much for your time and patience.

Sorry for the delay.

Are you trying to know if the smart bulbs could be scheduled on with different brightness at different time; at the same time, the preset brightness would always stay on 1%?

 

Thanks a lot.

  0  
  0  
#2
Options
Re:Smart bulb brightness
2020-10-20 11:18:37 - last edited 2020-10-20 11:20:13

@Brook Hi Brook,

I  would like to have the bulbs come on at scheduled times at 100% but if there was a power cut, I would like them to come back on at 1% until they were switched to 100%, or off, by the schedule.

Thanks.

  2  
  2  
#3
Options
Re:Smart bulb brightness-Solution
2020-11-02 22:07:26 - last edited 2020-11-02 22:08:05

I have now purchased the bulbs and they do work as I require. i.e. they can be set to 1% default for when the power is lost and returned, and they can be set to come on at a specific brightness using the the schedule, irrespective of the default.

Recommended Solution
  2  
  2  
#4
Options

Information

Helpful: 0

Views: 728

Replies: 3

Related Articles
KL110 bulb buzzing sound after using less than 6 months
1386 0
A New Smart Lifestyle with Kasa Smart Lighting
1046 2
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.