TL-WPA4220 TKIT Can't connect second extender

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WPA4220 TKIT Can't connect second extender

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WPA4220 TKIT Can't connect second extender
TL-WPA4220 TKIT Can't connect second extender
2020-11-22 16:01:26 - last edited 2020-11-27 08:28:15
Model: TL-WPA4220 KIT  
Hardware Version: V4
Firmware Version:

Looking for help with TL-WPA4220 3 pack kit installation.

I have paired adapter with the first extender. Can't add the second one. Tried this several times, in different ways but there is always only one working at the time. 

Any advice?

 

Thanks,

K

  0      
  0      
#1
Options
1 Accepted Solution
Re:TL-WPA4220 TKIT Can't connect second extender -Solution
2020-11-27 08:27:37 - last edited 2020-11-27 08:28:15

@KaaWoo 

HI, sorry for the delay.

Could you please refer to the following suggestions:

  1. Put the two TL-WPA4220 next to each other, then press the pair button to see if they can be paired or not;
  2. Once they are paired, please pair TL-PA4010 with one 4220;
  3. Then put them all back together to see if they could be paired automatically;

 

If still failed, please try to manually change the network name on the adapter one by one to force them to pair;

How to change the power-line network name:

  1. Connect the computer via cable to 3 adapters one by one;
  2. Download the utility on the computer: https://static.tp-link.com/2018/201809/20180904/PowerLineUtility_Win_180816.zip
  3. how to change the power-line network name: https://www.tp-link.com/support/faq/1616/

Thanks!

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:TL-WPA4220 TKIT Can't connect second extender -Solution
2020-11-27 08:27:37 - last edited 2020-11-27 08:28:15

@KaaWoo 

HI, sorry for the delay.

Could you please refer to the following suggestions:

  1. Put the two TL-WPA4220 next to each other, then press the pair button to see if they can be paired or not;
  2. Once they are paired, please pair TL-PA4010 with one 4220;
  3. Then put them all back together to see if they could be paired automatically;

 

If still failed, please try to manually change the network name on the adapter one by one to force them to pair;

How to change the power-line network name:

  1. Connect the computer via cable to 3 adapters one by one;
  2. Download the utility on the computer: https://static.tp-link.com/2018/201809/20180904/PowerLineUtility_Win_180816.zip
  3. how to change the power-line network name: https://www.tp-link.com/support/faq/1616/

Thanks!

Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 497

Replies: 1