pa8030p tv disconnects when adding pc
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi!
I have a setup with a TV box, a computer and a raspberry-py all connected to a tplink switch with IGMP that works fine with a old D-Link powerline, but it's slow.
Just bought 2 PA8030P to upgrade the speed and stored the D-links.
If I only watch TV it works perfectly. If I turn on the computer or the raspberry, the TV starts hanging and dropping connectiion.
The computer and the raspberry always work fine, wether the TV box is on or not.
So, the problems only start when I connect something else to the same PA8030p (which has 3 ports, by the way). Also tried removing the tplink switch out of the equation with the same results.
My guess is the IGMP multicast starts confusing itself when I connect the computer or the raspberry py. The PA8030p doesn't support IGMP?
Thanks!
1. If the only TV connected to the TL-PA8030P, there is no problem, right?
That is correct.
2. simple map
internet router and powerlink on the left;
connected through eletricity cable to other powerlink on the right;
itself connected to a tv, pc and raspberry
