Archer MR400_V2 - does not disable 5Ghz wifi permanently and parental control not working...

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer MR400_V2 - does not disable 5Ghz wifi permanently and parental control not working...

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer MR400_V2 - does not disable 5Ghz wifi permanently and parental control not working...
Archer MR400_V2 - does not disable 5Ghz wifi permanently and parental control not working...
2020-12-20 19:23:29 - last edited 2020-12-21 00:56:49
Model: Archer MR400  
Hardware Version: V2
Firmware Version: 1.9.0 0.9.1 v0001.0 Build 190307 Rel.45273n

I want to permanently disable 5Ghz Wifi network. When I disable it in GUI, 5Ghz is not active, but when router restarts 5Ghz wifi is again active.

How can I disable it permanently, so that even after router reset 5Ghz wifi will stay disabled?

 

Also parental control does not work. Even if it should be disabled for one device, this device has full accesst to the internet.

 

I have checked FW versions, but I already have the newest one.

 

Is there any way that I get this (at least Wifi) working?

  0      
  0      
#1
Options
3 Reply
Re:Archer MR400_V2 - does not disable 5Ghz wifi permanently and parental control not working...
2020-12-28 12:59:44

@Routy I have tried with reset after 1 week and now 5GHz wifi stayed turned off.

  0  
  0  
#2
Options
Re:Archer MR400_V2 - does not disable 5Ghz wifi permanently and parental control not working...
2020-12-29 11:50:39

@Routy 

 

Hello, sorry for the late response.

 

 Do you mean the 5G issue was resolved by a reset and reconfiguration? That's good.

 

As for the Parental Control, may I know how do you want to use it? You may refer to the below instructions to double check the settings on the MR400:

https://www.tp-link.com/support/faq/1668/

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#3
Options
Re:Archer MR400_V2 - does not disable 5Ghz wifi permanently and parental control not working...
2020-12-29 12:02:06

@Kevin_Z No, I have done multiple resets also 1 week ago. Together with waiting for a few minutes before pluging the router back to the power.

After I week I said that I will try again and it just worked. I do not have a slightest idea why.

 

I have set parental control exactly as described in the manual, does not work even now. I might try again in a week :).

 

PS: I am quite disappointed with the SW side of this router. I used Linksys before and there it worked as it was set. No problems.

  0  
  0  
#4
Options