Latest firmware for RE450
Hello, I just today bought a TPLINK RE450. All is working.
My question is if there any new firmware update?
The info on the AP website is:
Firmware version: 1.0.5 Build 20200914 Rel. 34203 (8583)
Hardware version: RE450 v2.0
Thanks
SergioMC22
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Your current firmware is already the latest firmware and there is no newer firmware available yet.
Thank you very much.
- Copy Link
- Report Inappropriate Content
Hi,
Your current firmware is already the latest firmware and there is no newer firmware available yet.
Thank you very much.
- Copy Link
- Report Inappropriate Content
@TP-Link Thank you for your reply.
Today I began to notice some disconnections from mi RE450
I mean, the visibility of the 5Ghz network is not lost, but the connectivity to the internet is lost.
I am using the RE450 as an AP, connecting a network cable from the main router (AX1500) to the RE450.
But in the Tether app, I see a red icon over Status. Is that normal? Where can I see what is the reason for that red icon?
Thanks
- Copy Link
- Report Inappropriate Content
@SergioMC22 Look the screenshot
- Copy Link
- Report Inappropriate Content
@SergioMC22 Hi, thank you for your reply.
The red Led on " Global" icon normally means Range extender has disconnected from Router, or main Router currently has no Internet.
Please examine the cable between RE and router and make sure it's properly connect, or change a different Ethernet cable between RE and router.
Can you wire a PC to router via the same Ethernet cable that RE used, make sure PC can get Internet from router via that cable share us a photo of IP address on PC:
https://www.tp-link.com/support/faq/838/
How about the LEDs on range extender right now?
- Copy Link
- Report Inappropriate Content
SergioMC22 wrote
Hello, I just today bought a TPLINK RE450. All is working.
My question is if there any new firmware update?
The info on the AP website is:
Firmware version: 1.0.5 Build 20200914 Rel. 34203 (8583)
Hardware version: RE450 v2.0
Thanks
SergioMC22
@ TP-Link Hello, I also bought this model RE450 V2, upgraded to version 1.0.5 and I notice disconnecting a few times and then immediately reconnects again ... does this update take too long? Another question I live in Brazil and this is the repeater of TP Top link sold over here and I want to know if there are any plans to add OneMesh to it? because I have the model RE200 V4 that despite being inferior in signal coverage it does not is losing the connection like that and he already has support for OneMesh, and having this on the RE450 would be very good, despite this bug of losing the connection he is very top and the OneMesh on him would be fantastic 🤩
Another problem that I see a lot is that taking the RE200 again in comparison with the RE450, On the RE200 when I connect to a router and extend the network whenever I need to enter to see something on it Only digit the address tplinkrepeater.net and I can already access the page of my repeater, already on the RE450 I cannot access it by the address above, and it says on the repeater itself that the configuration page is tplinkrepeater.net, as in RE200 also mentions, in other words, I lose access to the RE450 through the address mentioned above and I can only access it by the IP that it receives from the router and that complicates a little because it changes after a certain period of time.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2089
Replies: 5
Voters 0
No one has voted for it yet.