Home Network Community > Deco > Ethernet issues when internet fails
< Deco

Ethernet issues when internet fails

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
1234

Ethernet issues when internet fails

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Ethernet issues when internet fails
Ethernet issues when internet fails
2021-03-26 03:53:27 - last edited 2021-07-09 07:22:50
Model: Deco M5  
Hardware Version:
Firmware Version: 1.5.3 Build 20210203 Rel. 68223

I noticed that if the internet fails (ie, the modem disconnects) the second ethernet port on the main router also stops working.

Ie. no local traffice to the hardwire connected device.

 

Will this issue be fixed in a future update?

 

Thanks!

 

 

  1      
 
  1      
 
#1
Options
2 Accepted Solutions
Re:Ethernet issues when internet fails-Solution
2021-05-11 08:45:35 - last edited 2021-07-09 07:22:50

@yacc 

For Deco Mesh system, it would have more than 2 units and each unit has at least 2 Ethernet ports;

It would be time-consuming and confusing to find out which port should be connected to the internet modem;

So Deco products support the WAN/LAN auto-sensing feature;

 

The current issue is related to this feature on the Deco;

When the main Deco failed to detect the internet, both Ethernet ports on the main Deco would work as WAN ports;

So It is suggested that you could move the network switch behind one of the satellite Deco units.

 

 

 

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
Recommended Solution
  0  
  0  
#2
Options
Re:Ethernet issues when internet fails-Solution
2021-08-30 02:35:52 - last edited 2021-08-31 02:53:29

@Rhino30 

Hi, You could have a look at the following link:

[Deco] WAN/LAN auto-sensing

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
Recommended Solution
  0  
  0  
#25
Options
35 Reply
Re:Ethernet issues when internet fails-Solution
2021-05-11 08:45:35 - last edited 2021-07-09 07:22:50

@yacc 

For Deco Mesh system, it would have more than 2 units and each unit has at least 2 Ethernet ports;

It would be time-consuming and confusing to find out which port should be connected to the internet modem;

So Deco products support the WAN/LAN auto-sensing feature;

 

The current issue is related to this feature on the Deco;

When the main Deco failed to detect the internet, both Ethernet ports on the main Deco would work as WAN ports;

So It is suggested that you could move the network switch behind one of the satellite Deco units.

 

 

 

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
Recommended Solution
  0  
  0  
#2
Options
Re:Ethernet issues when internet fails
2021-05-12 21:32:29

@TP-Link Thank you, I was able to reach out to tech support and they were able to fix the issue for me by using a beta version of the firmware. 

 

Would the selection of which ethernet port to use as the WAN port be offered as an option for the release version of the firmware?

 

Thanks!

  1  
  1  
#3
Options
Re:Ethernet issues when internet fails
2021-05-13 03:39:38

 

@yacc 

Thank you very much for the update;

I have not heard any updated news about the manual selection of the WAN port on the future release version of the firmware yet;

And I would keep attention to the similar feedback in case other users might have the same request;

Thanks a lot.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#4
Options
Re:Ethernet issues when internet fails
2021-06-10 21:32:10

@yacc I'm having this same issue with 3 x S4's. When internet goes off, all devices connected to the other port stop being able to connect to.

  0  
  0  
#5
Options
Re:Ethernet issues when internet fails
2021-06-11 06:32:37

@djismGAMING 

Hi,

So to double confirm, when the internet service is off, the wired clients connected to the second port of main Deco are not accessible in the local LAN network, right?

Can I have a picture of your network diagram, such as 

Thank you.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#6
Options
Re:Ethernet issues when internet fails
2021-06-12 05:36:07 - last edited 2021-06-12 06:01:07

@TP-Link 

 

Indeed and the diagram would be exactly like the one you shared. 
 

8 port unmanaged switch connected to the main deco's second port (the port above). I use the port below for the WAN to my ISP's cable modem. 
 

i can't connect via PC1 to devices on the main Deco that are connected via Wifi or to any other devices in other Decos, just to the ones on the switch. 
 

so all smart switches and lamps around the house can't be controlled via HomeAssistant since the HomeAssistant server is on the switch and can only connect to things connected do the switch. 

  0  
  0  
#7
Options
Re:Ethernet issues when internet fails
2021-06-12 05:56:03 - last edited 2021-06-12 05:57:00

@djismGAMING that's the one 

Deco 2 and 3 connected via wifi to main Deco

  0  
  0  
#8
Options
Re:Ethernet issues when internet fails
2021-06-30 00:35:53

@TP-Link I'm having this issue aswell, with Deco M4R and switch connected to main deco. Is there a way to specify WAN/LAN ports on M4R? 

 

Regards

  0  
  0  
#9
Options
Re:Ethernet issues when internet fails
2021-06-30 07:05:47

@lasuricata 

 

Can you please confirm the issue you are encountering with the Deco M4R, exactly the same network layout, and usage as djismGAMING's? Please provide more details, then we can confirm if the issue is caused by the WAN/LAN port.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#10
Options
Re:Ethernet issues when internet fails
2021-07-07 06:17:03

@TP-Link hi there. Having the same exact issue with deco m5. When internet is down, lan devices are inaccessible. 

  0  
  0  
#11
Options
1234

Information

Helpful: 1

Views: 7814

Replies: 35

Related Articles
Hub fails to pair
83 0
Main AX55 Router Fails to Reboot in Ethernet Backhaul Environment
621 0
 Extender fails to connect to internet
564 0
 wi fi works but ethernet connection fails daily
278 0
 Internet fails when my laptops connects to the web
408 0
 TL-WA901ND - Internet Connection fails
1004 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.