Archer C1900 dropping internet after auto language change

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C1900 dropping internet after auto language change

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C1900 dropping internet after auto language change
Archer C1900 dropping internet after auto language change
2021-04-16 18:42:09 - last edited 2021-04-16 20:18:36
Model: Archer C1900  
Hardware Version: V2
Firmware Version: 1.0.0 Build 20161117 rel.77332(5553)

A few days ago all the devices connected to our Archer C1900 started having hiccups in their connection — router and modem both seemed to be fine, even after reset, and our devices were still connected to the network, but no internet was coming through. Often turning off wireless and reconnecting on the devices is enough to reset, but it happens consistently.

 

I found a couple threads that mention this issue:

https://community.tp-link.com/en/home/forum/topic/179006

https://community.tp-link.com/en/business/forum/topic/179006?page=11

 

I don't see any firmware upgrade available for my particular device though. Is there any solution to keep this automatic language cycle from happening?

 

My system log looks the same - the router automatically cycles the language, and that seems to be when our biggest issues with connectivity happen.

 

2021-04-16 13:15:10 locale[20455]: <6> 283051 Language is changed to 'en_US'
2021-04-16 13:15:10 locale[20455]: <7> 283002 Explorer language is 'en_US'
2021-04-16 13:14:51 locale[20148]: <6> 283051 Language is changed to 'en_US'
2021-04-16 13:14:51 locale[20148]: <7> 283002 Explorer language is 'en_US'
2021-04-16 13:14:51 locale[20127]: <6> 283051 Language is changed to 'en_US'
2021-04-16 13:14:51 locale[20127]: <7> 283002 Explorer language is 'en_US'
2021-04-16 11:08:32 locale[20553]: <6> 283051 Language is changed to 'en_US'
2021-04-16 11:08:32 locale[20553]: <7> 283002 Explorer language is 'en_US'
2021-04-16 11:08:12 locale[20329]: <6> 283051 Language is changed to 'en_US'
2021-04-16 11:08:12 locale[20329]: <7> 283002 Explorer language is 'en_US'
2021-04-16 11:08:11 locale[20312]: <6> 283051 Language is changed to 'en_US'
2021-04-16 11:08:11 locale[20312]: <7> 283002 Explorer language is 'en_US'
2021-04-16 11:07:12 locale[19719]: <6> 283051 Language is changed to 'en_US'
2021-04-16 11:07:12 locale[19719]: <7> 283002 Explorer language is 'en_US'
2021-04-16 11:06:34 locale[19172]: <6> 283051 Language is changed to 'en_US'
2021-04-16 11:06:34 locale[19172]: <7> 283002 Explorer language is 'en_US'
2021-04-16 11:06:31 locale[19115]: <6> 283051 Language is changed to 'en_US'
2021-04-16 11:06:31 locale[19115]: <7> 283002 Explorer language is 'en_US'
2021-04-15 18:57:45 led-controller[916]: <3> 288753 Config importing failed
2021-04-15 06:43:23 led-controller[916]: <3> 288753 Config importing failed
2021-04-15 06:25:47 led-controller[916]: <3> 288753 Config importing failed
2021-04-15 00:41:13 led-controller[916]: <3> 288753 Config importing failed
2021-04-14 11:35:15 led-controller[916]: <3> 288753 Config importing failed
2021-04-13 06:59:12 led-controller[916]: <3> 288753 Config importing failed
2021-04-12 11:55:14 led-controller[916]: <3> 288753 Config importing failed
2021-04-11 09:32:43 led-controller[916]: <3> 288753 Config importing failed
2021-04-11 08:45:50 led-controller[916]: <3> 288753 Config importing failed
2016-11-17 00:00:31 led-controller[916]: <3> 288753 Config importing failed

  0      
  0      
#1
Options
2 Reply
Re:Archer C1900 dropping internet after auto language change
2021-04-20 01:22:26

@christopherex 

 

The two thread you linked are not the same issue as yours, they are encountering a reboot issue, while you seem to experience internet failure. Is there any special setting like address reservation on the router for the devices that connect to it? Try to reset the router to factory defaults then reconfigure it from scratch if you are not sure if there is any special setting on it.

 

Please check if the devices that connect to the router via an Ethernet cable will work flawlessly when there is no internet on the wireless devices when the issue happens. If the wired connection always work fine, try to modify the wireless settings on the router, such as wireless channel, channel width, and security, you can check the guide below:

https://www.tp-link.com/support/faq/722/

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer C1900 dropping internet after auto language change
2021-07-13 14:02:56

@christopherex Any luck with this?

  0  
  0  
#3
Options