100 MB ports ETH are delivering less than 50 MB
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
HI! I m checking my velocity networking and noticed something that I can´t understand till now. If anyone can help me, I'd thanks a lot!
My network is Hauwei Modem 600 Mpbs - eth port 1GB connected by a cat6 cable to Swtich TP-LINK TL-SG1008D, this model suport 10/100/1000 MBps connections . The connection between Modem and the Switch is through a CAT6 cable support till 1 GB. There are 6 users are connected on this switch with CAT5e cable. The problem is the folowing:
1 - When I connect a notebook with 1GB eth port throught a 3 meters CAT6 cable directly on the TP-LINK TL-SG1008D switch the velocity is around 450/500 MBps, what is perfect!
2 - When I connect any other equipment(router ou notebook with eth ports 100 MB) usint a CAT5E on the TP-LINK TL-SG1008D switch, the velocity is around 50 MBps, even with a only one meter cable.
I have no idea. I tried with another same model switch, and it happens the same thing. The solution I chosed was use CAT6 cable from Modem to Switches. And from that Switches I'm using a CAT5 cable. I was expectting at least 70/80 MBps for the 100MB Users.
100 MB ports ETH are delivering less than 50 MB
Sorry by some english mistakes.
