Cannot change Up and Down rate in QoS (Archer AC1600)
Hi everyone,
I have set up my new Archer VR600v and was testing the download / upload speed. However, I have realized that the speed results are not true. The rates in the QoS are different than the numbers I used to have. I cannot those fields. The user guides tells that it is possible to do. How can I do that?
Do I need to contact my ISP?
Cheers!
- Bookmark
- Report Inappropriate Content
Hey
Can you tell us what speeds you are getting during your tests?
From the screenshot your bandwidth (line speed) is ~ 64 mbps down and 12 mbps up. QOS upload bandwidth is set at 100mbps which is roughly 8 times faster than you are capable of.
If you can provide the speed test details that would help!
- Report Inappropriate Content
Hi,
The speed test shows 58 mbits up and 10 mbits down. As per contract, my line is provided with 100 up / 100 down.
I just need the option to edit these numbers. Is there a way to enable that?
Thanks!
- Report Inappropriate Content
Hey
The speed tests you are seeing at 58 / 10 would be what I expect as your line is reading 64 / 12 its inside the margin of error.
If you are paying for 100 / 100 then you need to speak to your ISP as you are currently getting 64 / 12 as indicated by the router, those number are not able to be edited, they are what your router is getting from your phone line in terms of speeds.
Being honest, 100 / 100 doesn't sound to me to be correct. ADSL and VDSL (i think you are vdsl) have a much faster download vs upload, usually an 8:1 ratio. My current FTTP connection for example is 960 down and 150 up
I recommend you check with your ISP first
- Report Inappropriate Content