Unable to lock specific LTE bands in MR600v2 i.e Band 3 and Band 40.
Unable to lock specific LTE bands in MR600v2 i.e Band 3 and Band 40.
![](/avatar/avatar-20.png)
Hello,
Unable to lock specific LTE bands in MR600v2 i.e Band 3 and Band 40. The same was possible with beta firmware in MR600v1. Can I use V1 beta firmware in V2?
Thanks,
Waibhav
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Generally, whether the bands aggregate or not, and how these bands are aggregated with each other, are decided by the cellular tower, the router only sends the request to the cellular tower in your area.
Just to confirm, do you mean you can get band 3 + band 40 on the older MR600 v1 beta firmware?
Can we have a screenshot of the Advanced > Status page when choosing band 3 and band 40 manually? How about other bands, such as band 3 + band 40?
- Copy Link
- Report Inappropriate Content
Here is the screenshot for your reference. Carrier aggregation with different bands was possible in beta firmware for MR600v1 router. Individual band lock option was available the Basic tab as shown below.
It will be great if similar functionality is included either through official or beta firmware with MR600v2. Thank You!
- Copy Link
- Report Inappropriate Content
Do you mean this option is not available on the newly released MR600 v2? Can we have the screenshot about the Advanced > Network > Internet page? You can refer to the screenshot we posted here:
- Copy Link
- Report Inappropriate Content
Hello,
On the Advanced page, there is an option to select bands, not to lock a particular band as it was there in the Basic page of the beta firmware of MR600v1. Here is the screenshot of the MR600v2:-
- Copy Link
- Report Inappropriate Content
After selecting the Band 3 and Band 40 manually on the Advanced page and save it, did you reboot the router? You may try to click on System Tool > Reboot, then confirm if it will display a Band 3,40 on the Status page.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I see. If that is the case, we would like to investigate this on our end as well. When you have time and if you are willing can you please reply the email that we sent to you previously? The engineers will help follow it up. Thanks.
- Copy Link
- Report Inappropriate Content
I am also facing same problem.Band lock is not working in MR600v2-4G+ Cat6 AC1200 Wireless Dual Band Gigabit Router(Version 2)
Archer MR600
Firmware version : Archer_MR600v2_1.3.0_0.9.1_[210208-rel61056]_up_boot_Release_2021-02-08_17.06.35.bin
Waibhav wrote
Hello,
Unable to lock specific LTE bands in MR600v2 i.e Band 3 and Band 40. The same was possible with beta firmware in MR600v1. Can I use V1 beta firmware in V2?
Thanks,
Waibhav
- Copy Link
- Report Inappropriate Content
Hi Joseph,
I also followed up with TP-Link support multiple times regarding but they are not willing to include individual band lock feature for MR600v2.
Regards,
Waibhav
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
![](/avatar/avatar-20.png)
Information
Helpful: 0
Views: 2482
Replies: 11
Voters 0
No one has voted for it yet.