If you have experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, Please download and install the following beta firmware on the router to manually fix the band. Please be sure you have read The Beta Test Agreement before proceeding!
Note: Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.
Archer MR200(EU)_V3/V4, Archer MR400(EU)_V2/V3, TL-MR6400(EU)_V3/V4, TL-MR150(EU)_V1:
*The official firmware has been released for the below models, you can install the latest firmware via the online upgrade or download it from the official website:
Archer MR600(EU)_V2_200909 and later versions
TL-MR6500v(EU)_V1_200924 and later versions
For other models that support Band Selection, there will be new official firmware in the near future. Keep an eye on the official website or router web GUI for the new updates. We will update here also if the new models add the feature later.
If you are not sure about how to select the band manually on the router web interface, check the instructions below: