TP-Link Community > Kasa Smart Switches > Clicking Sound when Switching on the Kasa Smart Switch
< Kasa Smart Switches

Clicking Sound when Switching on the Kasa Smart Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Clicking Sound when Switching on the Kasa Smart Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Clicking Sound when Switching on the Kasa Smart Switch
Clicking Sound when Switching on the Kasa Smart Switch
2021-06-25 00:39:07 - last edited 2021-07-01 02:46:36
Model: HS200  
Hardware Version:
Firmware Version:

Hi, I recently installed the Smart Switch (HS200) and it works fine. However, while switching on/off with the App or Google Voice, there is a clicking sound. The light continues to work as normal, without any issues. Is that clilcking sound a source of concern or is it common? Thanks.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Clicking Sound when Switching on the Kasa Smart Switch-Solution
2021-06-25 12:14:56 - last edited 2021-07-01 02:46:36
It's normal, the clicking is an internal relay that connects/disconnects the switch's line in wire to the load out wire.
AutomationManager: Secure home automation without relying on cloud servers.
Recommended Solution
  5  
  5  
#2
Options
3 Reply
Re:Clicking Sound when Switching on the Kasa Smart Switch-Solution
2021-06-25 12:14:56 - last edited 2021-07-01 02:46:36
It's normal, the clicking is an internal relay that connects/disconnects the switch's line in wire to the load out wire.
AutomationManager: Secure home automation without relying on cloud servers.
Recommended Solution
  5  
  5  
#2
Options
Re:Clicking Sound when Switching on the Kasa Smart Switch
2021-06-29 04:17:36

@MikeP Thank you. Weirdly the Dimmer does not have this sound. It is just the Switch that seems to do it.

  0  
  0  
#3
Options
Re:Clicking Sound when Switching on the Kasa Smart Switch
2021-06-29 11:12:29
Right, dimmers need to be solid state because they vary the output voltage. Only switches can use an inexpensive on/off relay.
AutomationManager: Secure home automation without relying on cloud servers.
  5  
  5  
#4
Options

Information

Helpful: 0

Views: 6015

Replies: 3

Related Articles
Camera not working- clicking sound
218 0
Switch clicking and bulb flickering on and off
842 0
 Kasa Smart Switch - Power Outage
6710 1
 Smart plugs switching on & off after switching off
878 0
 C210 infrared sensor blinking/clicking sound
1033 0
 Kasa Smart Switch only works by pushing the reset buttons
495 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.