Deco M9 Plus | Signal Source Change possible
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Deco M9 Plus | Signal Source Change possible
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have set up:
- 1 Main Deco
- 7 Satellite Deco's
The Satellite Deco's all connect to the Main Deco, but the signal on almost all of them is weak.
Can we change the Signal Source for each of the Satellite Deco's? If so, how?
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link When will this be incorporated to a regular release? The beta is almost 6 months old.
- Copy Link
- Report Inappropriate Content
@TP-Link Can you send me the beta version as well? Thanks
- Copy Link
- Report Inappropriate Content
@TP-Link Can you send me the firmware as well? Have a house with 5 M9's. Previously had 6 setup but was having all sorts of issues. With 5 it's manageable but still have significant latency issues when doing anything over wifi.
- Copy Link
- Report Inappropriate Content
I would also like to try the firmware for better signal source selection. Can you email me as well? I am using M9 Plus
- Copy Link
- Report Inappropriate Content
@TP-Link Half year later - is it possible to receive it? Or to became public???
- Copy Link
- Report Inappropriate Content
@TP-Link Please help. I have the M9 with the router my office on the second floor and both satellites in the room below. I have very slow wifi download slow speed even though I have over 400mps on my laptop. I check the M9 and it uses the channels with the most interference and avoids channels not in use. Not sure what I am doing wrong. Firmware is upto date. I had a Netgear Nighthawk 7000 router before it crapped out. I was very happy with it and feel foolish falling for the M9 promise.
- Copy Link
- Report Inappropriate Content
It is actually Debug firmware, not a Beta one.
I don't think Decos are Mesh at all. There are just TP-Link N300 with a cut-off, fancy UI and nice plastics outside.
I made a topic about that: https://community.tp-link.com/en/home/forum/topic/528536?page=1
Update an e-mail from now: "We are sorry that you are not happy with your product. If Deco did not meet your expectations, you should have chosen another product. We did not claim that Deco is the best option for your network topology."
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the message and there is no beta firmware for Deco M9 plus yet.
Please refer to this link and send an email to support.forum@tp-link.com with the requested information and we could invite the engineers to help me re-select the signal source if necessary.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 2826
Replies: 20
Voters 1