Accessibility among each other

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Accessibility among each other

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Accessibility among each other
Accessibility among each other
2021-07-26 16:27:18 - last edited 2021-07-26 16:33:18
Model: TL-PA4020P KIT  
Hardware Version: V3
Firmware Version:
Hello!

I have 3 powerline adapters. The 1 is connected to the router. The 2 in the living room and the 3 in the bedroom. The connection from 1 (router) to 2 is available and from 1 (router) to 3. Unfortunately, there is no ping from the receiver (location 2) to number 3 and vice versa. Only from the router to 2 and 3. How do I get it that all 3 communicate with each other ???

  0      
  0      
#1
Options
1 Reply
Re:Accessibility among each other
2021-07-28 07:48:10 - last edited 2021-07-28 07:49:10

@dev1337  Hello, 

If  the main powerline unit (#1) could communicate with #2 and #3 and all 3 units shows up on the tpPLC Utility, that means they are in the same network and devices ( computers) connected to them could ping to each other, as all the devices obtain IP addresses from router.

 

Powerline rate between #2 to #3 or vice versa the is very slow and shows Red line, that means the power line environment is very poor or they are too far away from each other. 

 You could change a different wall socket for #2 and #3 and follow this instruction and remove the things that may affect the power environment:
https://www.tp-link.com/support/faq/409/

 

 

 

 

 

  0  
  0  
#2
Options