Home

Forums

Stories

Knowledge Base

Home Network Community > Powerline Adapters > Loss of connectio between all devices

< Powerline Adapters

Loss of connectio between all devices

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Loss of connectio between all devices

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Gerry941

2021-08-07 22:15:13 - last edited 2021-08-12 09:19:29

Posts: 2

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2021-08-07

Loss of connectio between all devices

2021-08-07 22:15:13 - last edited 2021-08-12 09:19:29

Model: TL-PA8010P KIT

Hardware Version: V1

Firmware Version: Unknown

In trying to cast to tv was advised by Chris (China based) to reset the TL - pa 8010p and re- pair the two wpa8630 which are in different rooms. Heretofore all worked perfect. Now neither wpa8630 will pair.

Spent hours (literally texting agent and even sent pics) Advised to use trying YouTube videos and also use trying Utility. All to no avail.

Bought items in April 2020,

Any ideas what to do?

1 Accepted Solution

Solla-topee

2021-08-11 07:55:37 - last edited 2021-08-12 09:19:29

Posts: 13724

Helpful: 2373

Solutions: 2074

Stories: 8

Registered: 2020-05-19

Re:Loss of connectio between all devices-Solution

2021-08-11 07:55:37 - last edited 2021-08-12 09:19:29

@Gerry941 Hello,

Sorry for the late response, may I know are you able to pair WPA8630 with the main adapter right now?

>It is recommended to put 2 Powerline units in the wall sockets and use the pair button to pair it

> Later plug the 3rd powerline unit in the same room, and pair 3rd one with the 2nd adapter by pair button

Here is a guide to add extra powerline unit into existing powerline network by pair button referring to the instruction:
https://www.tp-link.com/support/faq/1081/

Note: press Pair button only for 1 sec, if the Power Led does not blink, press it again.
When the Powerline Led or House Leds are on, the pairing process is done.

If the above does not work,please refer to this instruction to pair the powerline units/ add an extra powerline unit by Powerline Key:
https://www.tp-link.com/en/support/faq/1615/

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Recommended Solution

3 Reply

Solla-topee

2021-08-11 07:55:37 - last edited 2021-08-12 09:19:29

Posts: 13724

Helpful: 2373

Solutions: 2074

Stories: 8

Registered: 2020-05-19

Re:Loss of connectio between all devices-Solution

2021-08-11 07:55:37 - last edited 2021-08-12 09:19:29

@Gerry941 Hello,

Sorry for the late response, may I know are you able to pair WPA8630 with the main adapter right now?

>It is recommended to put 2 Powerline units in the wall sockets and use the pair button to pair it

> Later plug the 3rd powerline unit in the same room, and pair 3rd one with the 2nd adapter by pair button

Here is a guide to add extra powerline unit into existing powerline network by pair button referring to the instruction:
https://www.tp-link.com/support/faq/1081/

Note: press Pair button only for 1 sec, if the Power Led does not blink, press it again.
When the Powerline Led or House Leds are on, the pairing process is done.

If the above does not work,please refer to this instruction to pair the powerline units/ add an extra powerline unit by Powerline Key:
https://www.tp-link.com/en/support/faq/1615/

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Loss of connectio between all devices

Loss of connectio between all devices

Information

Voters 0

Tags