Deco connection instable - Ethernet and WI-FI
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello.
I've installed my deco devices almost 2 months ago.
WI-FI connection on my phones worked well for some time, but since the initial setup that my computer is always losing connection in WI-FI and Ethernet.
Now I'm also expiriencing WI-FI breaks on my phones also.
I've download the log file to see if I can have some help. Should I upload it here?
Best Regards.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, would you mind trying the beta firmware here first；
[Solution] Wi-Fi speed drops down after updating Deco M4 to the latest 1.5.0 firmware
- Copy Link
- Report Inappropriate Content
@TP-Link I don't mind, but since I have TP-Link problems, the solution is always a beta firmware. That's strange...
- Copy Link
- Report Inappropriate Content
I've check the link you sent me because the problems don't stop. So First point in your PDF is:
"Please verify the hardware version of your device. Wrong firmware upgrading may damage your device and void the warranty."
Then I saw that the beta version in that post is for Hardware version 1.0. In initial post I said that my hardware is 2.0!!!
Can you please be a bit more professional?!?!
- Copy Link
- Report Inappropriate Content
Hi, please don’t worry and the beta firmware is suitable for both V1 and V2. Since it is only allowed to choose one hardware, so only V1 is chosen but now I have deleted the hardware in case of further confusion. Thanks a lot for understanding.
Since there is no improvement after installing the firmware, we might need your help to confirm the following details:
When the internet dropped out, would any Deco turn red?
How often did this drop the connection?
When the computer and smartphone dropped the internet, are they still connected to Deco but no internet service?
May I know who is your internet service provider and what is the internet connection type, such as Dynamic IP, or PPPoE?
Here are some suggestions for your reference:
1. turn off the Mesh Technology for the mobile devices.
2. turn off the fast roaming and beamforming on the Deco APP.
Thank you very much.
- Copy Link
- Report Inappropriate Content
I did not install beta firmware yet. I will as soon as you confirm that there will be no warranty issue.
"When the internet dropped out, would any Deco turn red?"
- No
"How often did this drop the connection?"
-It's not in a regular way. Computer does a lot, Iphone it's not in a regular way.
"When the computer and smartphone dropped the internet, are they still connected to Deco but no internet service?"
- Yes. It shows connected but without internet.
"May I know who is your internet service provider and what is the internet connection type, such as Dynamic IP, or PPPoE?"
- MEO , and internet connection on ISP router is IPoE. On deco is set as Dynamic IP.
Also I have a log file that I can send to support.
- Copy Link
- Report Inappropriate Content
Hi, installing the beta firmware does not void the warranty.
You could send me the log file after installing the beta since the beta firmware is also the debug firmware.
By the way, may I know the model number of the computer and iPhone that had an unstable connection?
And how did you recover the internet connection when the computer disconnected from the internet?
Thank you very much.
- Copy Link
- Report Inappropriate Content
Computer is a Asus K550J and Iphone SE 2020.
I will install and send it later. Where should I send the log?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 969
Replies: 7
Voters 0
No one has voted for it yet.