Archer T2U Nano(EU) Ver1, crashes/disconnectes on Load in 5GHz Band
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I bought the Archert T2U Nano in Germany since my built in Wifi is old/slow.
On 5GHz Networks it disconnects/breaks the internet connection when under high load, recovers after a minute or enabling flight mode.
My Laptop is just about 1m from the Router and I get good transfer speeds. But whenever I start speedtests or larger downloads on the 5GHz Band the Stick seems to disconnect and drop the connection.
Not every time, but frequently and it can be recreated starting an internet speed test, or large download.
Windows10 Wifi Symbol does not necessarily show disconnect, but recovery takes about a minute or swithich on/off flight mode.
If I disable QoS in the device/driver the network speed drops from 433/433 (Win10 display) to 65/65, but seems to be more stable. with QoS off the problem also exists.
Have not noticed this on 2,4 GHz yet.
Currently using Driver Microsoft 1030.38.712.2019
But also happens with RT Driver 1030.38.712.2019
guess it is the same one?
Is this a known issue? Any fixes known? Help apreciated.
Coincidence: Just happend while typing this post (had to redo the post) :-(
Router ist AVM Fritbox cable 6591 but I also tried with the origial Vodafone Wi-Fi6 router.
I have partly resolved the problem, but am still stuck. I switched the T2U Nano from the USB3 Port to the USB2 Port of my laptop (old Lenovo Yoga Ideapad 13).
The connection seems to be more stable now. I haven't discovered the massive dropouts anymore.
But since I cannot use the Logitech Unifying receiver in the USB3 port (known issue with interference) I can not keep this setup.
Do you have any Ideas, if the driver may be instable/incompatibe with USB3 ports? Any way I can find out if this is related to T2U or to my laptop/chipset drirver?
btw. I tried the linked driver; but it works the same as the original one on the USB2 port; i don't see any difference
@Solla-topee Thanks for the quick response, but no success on the USB3 Port. Inital connection to Wifi was also very hesitant (neede to enable flight mode 2 times and reboot)
Speedtest on USB2 port
and 2 min Later on USB3 port
Showing 5Ghz and 433/433 in Windows.
Also on USB3 it disconnects completely for a few seconds "no internet" and then it is back...
Is there any chance I can figure out, if this is a mainboard/usb-chipset problem, or a T2U problem?