NAT Forwarding is not working among WAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

NAT Forwarding is not working among WAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
NAT Forwarding is not working among WAN
NAT Forwarding is not working among WAN
2021-11-01 15:14:47 - last edited 2021-11-05 07:55:48
Model: Archer MR600  
Hardware Version: V2
Firmware Version: 1.3.0 0.9.1 v0001.0 Build 210208 Rel.61056n

I am trying to SSH forward my Raspberry using the 4G-Router Archer MR600 but cannot connect over internet.
Virtual Server Forwarding is working fine when my laptop and Raspberry are both connected to the router, but if I try to connect from a different access point it says "Resource temporarily unavailable". I am absolutely sure my Forward settings are not wrong. Now I also tried using with and without DDNS, Firewall, and many other settings that could mess this up in my mind but nothing changed. Even worse: when I ping the WAN IP of the router it replies when connected to its Wi-Fi, and doesn't when from a different access point !
I am at this point where, after doing researches for over 6 hours, I cannot find solutions by myself... 
 

  0      
  0      
#1
Options
1 Accepted Solution
Re:NAT Forwarding is not working among WAN-Solution
2021-11-03 09:21:09 - last edited 2021-11-05 07:55:48

@Juloos 

Hi, it is also suggested to have a look at this link:

Remote Access issue on LTE Gateway Routers

Recommended Solution
  0  
  0  
#5
Options
5 Reply
Re:NAT Forwarding is not working among WAN
2021-11-01 15:29:07

@Juloos same for me the reason is the ISP = Internet Service Provider gave you an private ip insted of a public 


 

 

  2  
  2  
#2
Options
Re:NAT Forwarding is not working among WAN
2021-11-01 15:45:21 - last edited 2021-11-01 15:46:03

@Royzer 
What do you mean by Private IP ? Anyway thanks for leading me to a possible clue on my problem

  0  
  0  
#3
Options
Re:NAT Forwarding is not working among WAN
2021-11-01 15:47:36

@Juloos its and IPv4 that is assined to your router by the ISP

 

  0  
  0  
#4
Options
Re:NAT Forwarding is not working among WAN-Solution
2021-11-03 09:21:09 - last edited 2021-11-05 07:55:48

@Juloos 

Hi, it is also suggested to have a look at this link:

Remote Access issue on LTE Gateway Routers

Recommended Solution
  0  
  0  
#5
Options
Re:NAT Forwarding is not working among WAN
2021-11-04 11:00:30

@TP-Link 
Thank you a lot, that helps me find a solution.

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 558

Replies: 5