Home Network Community > 5G/4G Wi-Fi Routers/MiFi > Neither can I access the camera nor can I remotely administer MR600
< 5G/4G Wi-Fi Routers/MiFi

Neither can I access the camera nor can I remotely administer MR600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Neither can I access the camera nor can I remotely administer MR600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Neither can I access the camera nor can I remotely administer MR600
Neither can I access the camera nor can I remotely administer MR600
2021-11-27 14:20:14 - last edited 2021-12-01 11:29:29
Model: Archer MR600  
Hardware Version: V1
Firmware Version: Version du firmware:1.2.0 0.9.1

Hi,

 

MR600 has been properly configured ; and a webcam  is connected (ethernet) to the router.

As I have a no-IP account I set a domain name : myMR600.ddns.net.

I  set up the ddns parameters for MR600 . Thinks seem Ok as the message connected shows up and the IP adress which appears as the " last known"  in my no-IP account is the same as the one that MR600 displays.

BUT whenever I try to https://myMR600.ddns.net or when I try to connect to the webcam (fixed IP adress on the local network) I get error messages. Same problem with FTP for the NAS connected to MR600.

 

Help would be appreciated,

Thks in advance

 

FG

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Neither can I access the camera nor can I remotely administer MR600-Solution
2021-11-28 16:48:16 - last edited 2021-12-01 11:29:29

@FGM 

 

Unfortunately, it has become pretty much the norm for all mobile/cellular network providers to assign private IPv4 addresses to their users.

 

Depending on where you live there may be one or more providers left that offer public IPv4 addresses, either for additional money or perhaps even free of charge, which would allow you to connect to your MR600 from the Internet.

 

 

Recommended Solution
  0  
  0  
#6
Options
5 Reply
Re:Neither can I access the camera nor can I remotely administer MR600
2021-11-27 23:14:36 - last edited 2021-11-27 23:20:03

@FGM 

 

I guess it's the same issue that many other users have reported previously.
 

https://community.tp-link.com/en/home/forum/topic/509778

 

Basically, if you log into your MR600's configuration webpage and the IP address shown in the "Internet" section is different than the IP address shown in your no-IP account, then it won't work.

  0  
  0  
#2
Options
Re:Neither can I access the camera nor can I remotely administer MR600
2021-11-28 12:39:57

@woozle 

Thks for yr answer .

 

But precisely the point is that the 2 addresses are IDENTICAL and nevertheless it doesn't (seem to) work ...

 

FG

  0  
  0  
#3
Options
Re:Neither can I access the camera nor can I remotely administer MR600
2021-11-28 15:22:43 - last edited 2021-11-28 15:23:33

@FGM 

 

Ok. Have you also verified that your Internet IP address doesn't fall within one of the following pools of private IP addresses? (as it is not possible to directly connect to private IP addresses from the Internet)

 

10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255
100.64.0.0 - 100.127.255.255

 

  0  
  0  
#4
Options
Re:Neither can I access the camera nor can I remotely administer MR600
2021-11-28 16:29:43

@woozle 

 

The IP adress which my ISP gave me was, as of this morning,  "10.235.abc.def"  which is part of the range you listed. I've no idea why it is so ....

 

Thks

 

FG

  0  
  0  
#5
Options
Re:Neither can I access the camera nor can I remotely administer MR600-Solution
2021-11-28 16:48:16 - last edited 2021-12-01 11:29:29

@FGM 

 

Unfortunately, it has become pretty much the norm for all mobile/cellular network providers to assign private IPv4 addresses to their users.

 

Depending on where you live there may be one or more providers left that offer public IPv4 addresses, either for additional money or perhaps even free of charge, which would allow you to connect to your MR600 from the Internet.

 

 

Recommended Solution
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 991

Replies: 5

Related Articles
 Access ip camera remotely in tp-link m7650
985 0
 I can not remotely access my Router
726 0
 Remotely access WAP
617 0
 Can't access router remotely
646 0
 Can't Access the Router Remotely
2848 0
 Unable to access router remotely
693 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.