Home Network Community > DSL Modem&Routers > VR1600v Cant log into admin after changing IP Address
< DSL Modem&Routers

VR1600v Cant log into admin after changing IP Address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VR1600v Cant log into admin after changing IP Address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VR1600v Cant log into admin after changing IP Address
VR1600v Cant log into admin after changing IP Address
2022-01-02 03:50:16 - last edited 2022-01-04 01:17:30
Model: AC500  
Hardware Version:
Firmware Version:

 i am having issues with TP-Link VR1600v setting it up as a second router. 

 

I connected the router to pc via LAN cable and  logged in  to change the IP to match my main router (and turn off DHCP) 

 

Once saved i get disconnected and when i try to reconnect via and new IP gateway address i can no longer access the admin login.

 

i get an error saying unable to connect 

  0      
 
  0      
 
#1
Options
1 Reply
Re:VR1600v Cant log into admin after changing IP Address
2022-01-02 15:03:54 - last edited 2022-01-04 01:17:30

@megabuff 

 

Hi,

 

Are you trying to setup the VR1600v as an Access Point that you want to connect to another router?

 

If yes, try to change settings one by one and check the result after every change.

 

1) Factory-reset the VR1600v to be able to login again. Do not connect anything to the VR1600v bar the PC you use for setting the router up.

2) Log into the VR1600v's webGUI (may ask you to setup a new password) and then change the LAN IP address to whatever you need (for example 192.168.1.1 -> 192.168.0.2) and then try to login again via the new address (in my example http://192.168.0.2).

3) Assuming the previous step worked fine, now switch off (disable) DHCP on the VR1600v and check if you can still operate the VR1600v's webGUI. In case your PC got disconnected, then you need to manually configure a proper static IP address on the network card of your PC. (for example 192.168.0.99)

4) After you've confirmed that you can still access the VR1600v's webGUI you can go on with setting up your network.

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 454

Replies: 1

About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.