Bandwith capped at 100Mbps (4G+)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Bandwith capped at 100Mbps (4G+)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Bandwith capped at 100Mbps (4G+)
Bandwith capped at 100Mbps (4G+)
2022-01-08 11:20:24
Model: Archer MR600  
Hardware Version: V1
Firmware Version: 1.2.0.0.9.1

Hello,

 

I've had my MR600 for a full year now and since the 4G was upgraded in my town I've noticed that I can't reach more than 100Mbps with the MR600. It will always stay between 90 and 100.

 

With my Google Pixel 6 Pro right next to it I easily get around 200Mbps. 

 

Is the MR600 capped at 100Mbps? Or is it my antennas that are damaged?

  1      
  1      
#1
Options
2 Reply
Re:Bandwith capped at 100Mbps (4G+)
2022-01-12 08:51:47

@OsloHimself 

Hi, can you check the network mode on the MR600, 4G, or 4G+?

When you test the speed on the Google Pixel 6 Pro, did you use the same SIM card? And how about the network mode on Google Pixel?

If you enable the hotspot on the Google Pixel 6 Pro and connect the device to the Wi-Fi of the hotspot, how much speed you could get?

  1  
  1  
#2
Options
Re:Bandwith capped at 100Mbps (4G+)
2022-01-12 11:33:55

@TP-Link Hello, 

 

The network mode on the MR 600 is set to 4G+ as you can see on the screenshot bellow. 

On my phone, with the same sim card, it's also 4G. 

 

I have made a speedtest on both the phone and the router with both at the same position and at almost the same time. You will find the result bellow. 

 

This one with the phone :

 

And then with the MR600 : 

 

We can notice that the ping is way better on the MR600 which is a good thing actually but the bitrate difference is huge. 

  1  
  1  
#3
Options