Two Av600 WIFI Extenders
Hi,
I have a TL-WPA4220 running on a home network without issue, I tried to introduce a new one to the network however when I connect the new one it doesnt show on the network when it pairs. When I reset it and scan i can see it, when I pair it then pairs but is not visible? If I remove the first extender and plug this second one it then it appears.....very odd! I think there is a setting of sorts on it?!
TIA
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @Redjohno
Try to turn off WiFi move, as this feature will let the new Wi-Fi extender synchronize the same SSID as the old one
What does Wi-Fi Move feature mean and how to use it on Powerline ac Extender? (new logo)?
Later you could change WiFi settings using tpPLC Utility or APP.
How to customize wireless settings on tpPLC Utility (new logo)?
How to Change Wireless Setting Using the tpPLC App (Smartphone)?
- Copy Link
- Report Inappropriate Content
Hello @Redjohno
Try to turn off WiFi move, as this feature will let the new Wi-Fi extender synchronize the same SSID as the old one
What does Wi-Fi Move feature mean and how to use it on Powerline ac Extender? (new logo)?
Later you could change WiFi settings using tpPLC Utility or APP.
How to customize wireless settings on tpPLC Utility (new logo)?
How to Change Wireless Setting Using the tpPLC App (Smartphone)?
- Copy Link
- Report Inappropriate Content
Thank you @Solla-topee , that has worked :)
- Copy Link
- Report Inappropriate Content
@Solla-topee Hi, this did not work for me. I switched the WiFi Move off on the old AV600, but it had no effect on the new one - still cannot pair. I could not switch the WiFi Move on the new one since it is not connected to the network. Finally I succeeded adding the new AV600 via the tpPLC - click Add, enter the 16 char. code of the new device and you are set.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 728
Replies: 3
Voters 0
No one has voted for it yet.