New Firmware How to limit internet speed of certain devices when connecting to the Wi-Fi Routers
This Article Applies to:
Archer AX73_V1.0
Archer AX4400(US)_V1.0
Archer C80_V2.20_1.12.0 Build 220924 and later versions
Archer C80_V1_1.12.0 Build 221010 and later versions
Archer A8_V2.20_1.12.0 Build 220924 and later versions
Archer A8_V1_1.12.0 Build 221010 and later versions
Archer C6_V4_1.12.0 Build 220924 and later versions
Archer A6_V4_1.12.0 Build 220924 and later versions
Archer C64_V1_1.12.0 Build 221010 and later versions
Archer A64_V1_1.12.0 Build 221010 and later versions
Early Release EasyMesh Firmware for Archer AX55
What is Speed Limit/Bandwidth Control?
Speed Limit is a new feature that has been brought to some Archer AX routers, such as Archer AX73 and AX4400. Some TP-Link fellow users may call it Bandwidth Control. Speed Limit gives you the permission to assign a specific download and upload speed for each device that connects to the router, you can then restrict how much of the speed the program or hardware is allowed to use at maximum.
How to use Speed Limit/Bandwidth Control?
Cannot wait to give it a try? Follow this guide below to configure it and see how it helps with the network performance:
How do I limit the speeds of devices connected to my network?
You can also assign a specific bandwidth for the Guest Network, and set an effective time for it. Visit this guide to see how to achieve that:
How do I set up Bandwidth Control and Effective Time for my guest network?
Moderator Note: The availability of Speed Limit or Bandwidth Control may vary by region even for the same model. Please check with your local website for more information.
Leave your comment below if you have any inquiries.