Drive doesn't show up in Device Manager
Once that it wasn't any "setup.exe" in the adapter installation file, I tried to do it manually, as was advised. Unfortunately, when i opened the Device Manager, there were not any "TP-LINK" drive in the Network Adapters section. However, I know the drive was recognized, because I can use the internet when connected by the adapters hardware.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @Leo_Carlos
Please check if the adapter shows up under the Device manager-> Network adapter/Other device. It could be shown as " TPLINK XX " or " 802.11n/ac" or its chipset like " RTL/ RealteckXX" etc.
- Copy Link
- Report Inappropriate Content
Hello @Leo_Carlos
Please check if the adapter shows up under the Device manager-> Network adapter/Other device. It could be shown as " TPLINK XX " or " 802.11n/ac" or its chipset like " RTL/ RealteckXX" etc.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello @Leo_Carlos
If you only got one ethernet adapter, try to temporarily disable Realtek Family controller and see if the current Ethernet connection interrupts, if so that is TG-3468 adapter.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3942
Replies: 3
Voters 0
No one has voted for it yet.