Deco X50 external Access TPLINK.DNS / Web Adress
Deco X50 external Access TPLINK.DNS / Web Adress
I purchased a Deco X50 3 Set and I am very happy with my purchase. Everything is working nicely, but there remains one annoying issue. I cannot access my Synology Diskstation externally. I Forwarded Port 1080 to my DSM but I cannot get through. I have a dedicated domain for my Diskstation which stopped working after switching from my previous Negear Router to TP-Link. The same goes for TP-Link's DDNS Service domain.tplinkdns.com. Entering domain.tplinkdns.com:1080 does only deliver a "website can't be reached" error. I cannot say many good things about my Nighthawk AC2300 but I never had problems getting through to my Diskstation.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@David-TP Hi David, Vodafone recently replaced the Cable-Modem since they suspected it to be the culprit regarding connection issues. It turned out to be another problem but they changed it anyway. At this occaison they seem to have switched off Bride Mode without telling me. So you were right, there was a NAT Firewall involved after all. I checked online to make a screenshot of the Bridge Mode being activated and it was disabled. Sneaky mothers a Vodafone. I switched it back on. The Deco shows the public IP under IPv4 now. Portforwarding works like a charm now. Thanks again for your help.
- Copy Link
- Report Inappropriate Content
@hquant Hi! How did you added the synology to your deco mesh? I connected mine with an ethernet cable to the main deco unit and can't find it.
- Copy Link
- Report Inappropriate Content
@Flo33 I have TP- link 8port gigabit switch connected to the main Deco and the Synology Play 218 connected to the switch, Works fine, Tehe Synology is visible by IP, quickconnect and domain name.
Any chance you had a fixed IP set up on your synology before you switched to the Deco? I had that problem at first. Connecting the Synology to the old router an deactivating fixed IP fixed it.
- Copy Link
- Report Inappropriate Content
@hquant I just have the isp router and the deco is connected to the isp router, i was hopping to put an ethernet cable from the nas directly in the deco main unit ( seeing that it has 3 ports, 1 i use for the wan) and i switched my tv also on the deco network so i can have high transfer speeds from the nas to the tv wirelessly , but my tv doesn't seem to see the nas , but it was visible on the wifi from the isp router. i changed on the deco network and cant even acces my nas
- Copy Link
- Report Inappropriate Content
Hi, based on the network layout:
ISP router---main Deco X50---NAS
It is kind of weird the wireless clients from Deco could not see NAS, but wireless clients from the ISP router does.
Is Deco X50 working as the wireless router?
Have you checked the IP address on the NAS as well as the wireless TV to see whether they are in the same IP range?
Thank you.
Best regards.
--------------------------
Deco X50-PoE is ready for your advice. If you are interested, please help us complete the following survey.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2789
Replies: 15
Voters 0
No one has voted for it yet.