Home Network Community > Wi-Fi Routers > Archer AX3000v1 Recovery Mode doesn't work
< Wi-Fi Routers

Archer AX3000v1 Recovery Mode doesn't work

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX3000v1 Recovery Mode doesn't work

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX3000v1 Recovery Mode doesn't work
Archer AX3000v1 Recovery Mode doesn't work
2022-11-04 20:01:06
Tags: #Firmware Update #Recovery Mode
Model: Archer AX3000  
Hardware Version: V1
Firmware Version: Latest

The recovery instructions for AX routers do not work.  I'v tried both the reset button and the WPS button while powering on and I don't get an orange LED and it just boots normally.
 

Please provide the correct instructions as the instructions at https://www.tp-link.com/us/support/faq/1482/ do not work.

  0      
 
  0      
 
#1
Options
2 Reply
Re:Archer AX3000v1 Recovery Mode doesn't work
2022-11-07 07:55:25

Hello @WSteeleNYC 

 

Thank you for reaching out to us and welcome to the TP-Link community.

 

However, it has also come to our attention that activity in your account violated our Community Guidelines:
https://community.tp-link.com/en/home/forum/topic/257782

 

Please be aware you are prohibited to post repeated or duplicated threads and/or replies describing the same issue or request. We will take action for any further violation under your account, some of the repeated posts violated our guidelines will be deleted. Thank you for your cooperation and understanding.

 

Back to your concern, can I know why do you want to do a firmware downgrade for the AX3000? BTW, what is the exact model, hardware version, and firmware version of your TP-Link router, you mentioned Archer AX50 in some posts, but saying Archer AX3000 in others, which made me puzzled.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer AX3000v1 Recovery Mode doesn't work
2022-11-10 19:39:42

  @Kevin_Z It's an AX3000 Version 1 with the latest firmware.' i posted under AX50 as well because it's essentially the same hardware except that for some reason tp-link has kept up to date on firmware for the AX50, but not the AX3000 for some strange reason.  Anyway, none of the old tftp debricking methods work.  Id like to know the new way to emergency flash firmware.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 396

Replies: 2

Tags

Firmware Update
Recovery Mode
Related Articles
Bricked Archer AX23 doesn't flash firmware in recovery mode
261 0
 recovery mode
380 0
I am reset my router but it Doesn't work.
593 0
Brand new Archer VR500 doesn't work
751 0
Archer C1200. Parental Control doesn't work.
5794 0
Archer MR 600 v2 - doesn't work at all
895 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.