TP Link Deco X50 and Proximus Decoder v5 HD
Hello,
i have a Deco x50 with 1 main and 2 satellite decos with the latest firmware version. The main connects to the satellites via Wi-Fi. The Deco is configured as a Wi-Fi router, because I want additional security and management features (such as shutting down internet access for my children when necessary).
I am a client of Proximus (Belgium) and have 1 BBox v3, with 2 decoders v5 with HDD. These decoders are connected to my satellite decos onto the LAN ports.
For this to work I need to enable IPTV in the management application. When I select bridging mode, and assign the LAN ports as above, then the TV works for about 2 days. Then the TV channels freeze and I get an error message.
I can then reset the deco bridging mode (set IPTV to off, save, and then re-enable IPTV as before). Then I can restart the decoders, and again watch TV for about 2 days.
What I would like is a feature that does the above reset (the TP Link specific part) every night at a time of my choosing.
I can also provide logs if you like, so that TP Link can find a more permanent solution.
i have tried various custom settings, but those seem to be very specific and I am not a network engineer.
Kind regards,
EightBit72