New Release Deco X50/X55 V1/V1.2/V2 with VPN/Static Route/MTU
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello Everyone,
We are excited to announce the official firmware version 1.2.x for Deco X50/Deco X55 V1/V1.2/V2 has been released recently. With this new firmware, you can now configure the VPN server/client, and other advanced features on the Deco.
Deco X50_V1/V1.2/V2
Deco X55_V1/V1.2/V2
>>How to update the firmware via web UI
Release Note:
New features:
1. Support for VPN server features, including Open VPN, PPTP VPN and L2TP/IPsec VPN.
2. Support for VPN client features, including Open VPN, PPTP VPN and L2TP/IPsec VPN.
3. Support for Static Route under Deco APP>More>Advanced.
4. Added the ability to customize the MTU size under Deco APP>More>Internet Connection>Internet Connection Type.
5. Added IOT network function.
* The following features(6-12) are also supported on 1.1.0 version:
6. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
7. Added support for customizing Satellite Deco Signal Source under Deco App > Internet > Select the Satellite Deco > Signal Source.
8. Added support for customizing clients Connection Preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
9. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS.
10. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP.
11. Added a prompt notification when the Ethernet link rate goes down to 100Mbps.
12. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
Improvements:
1. Optimized the MAC Clone function.
2. Improved system reliability and security.
Note:
1. The Advanced features need to be configured on the Deco APP and please make sure your Deco APP is up to date.
2. Some new features would not be available when the router is working in Access Point mode.
3. The firmware downgrade needs to be performed by firmware recovery. >>How to use firmware recovery on Deco
Please feel free to comment below if there is any question about the new firmware.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Mbauer5 After further testing re the tun0 speed, it appears to be per client. i.e I can have multiple clients all downloading simultaneously via the vpn and each one seems to hit around 20 mbits.
Maybe thats something we can look at.
CPU wise the unit does appear to have plenty of capacity available during heavy usage on the vpn.
Mem: 274972K used, 123272K free, 0K shrd, 547634616800K buff, 367499130424K ca
CPU: 4% usr 6% sys 0% nic 84% idle 0% io 0% irq 4% sirq
Not much going on there.
I will play around with parental controls and the anti malware services, maybe they are trying to inspect the traffic, possibly the encryption on the tunnel is having an impact.
VPN hasn't dropped at all though over 3 days, very stable which is great.
I think if this version gets to a release, it would be fine for you based on your current internet speeds.
- Copy Link
- Report Inappropriate Content
Ian_D wrote
@Mbauer5 After further testing re the tun0 speed, it appears to be per client. i.e I can have multiple clients all downloading simultaneously via the vpn and each one seems to hit around 20 mbits.
Maybe thats something we can look at.
CPU wise the unit does appear to have plenty of capacity available during heavy usage on the vpn.
Mem: 274972K used, 123272K free, 0K shrd, 547634616800K buff, 367499130424K ca
CPU: 4% usr 6% sys 0% nic 84% idle 0% io 0% irq 4% sirq
Not much going on there.
I will play around with parental controls and the anti malware services, maybe they are trying to inspect the traffic, possibly the encryption on the tunnel is having an impact.
VPN hasn't dropped at all though over 3 days, very stable which is great.
I think if this version gets to a release, it would be fine for you based on your current internet speeds.
thanks ian sounds great!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @Ian_D
Is there a possibility to already have access to the beta version?
I'm on version 1.2.2. Build 20230301 Rel 53300.
Grt
- Copy Link
- Report Inappropriate Content
@Festijn Not sure if this will help but under testing of the L2TP, the speed is approx 60mbits per client.
OpenVPN is still around 20 - 25mbits for some reason. Need more testing to identify the cause there
- Copy Link
- Report Inappropriate Content
@Festijn keep monitoring the forum and this page for updates
https://www.tp-link.com/uk/support/download/deco-x50/v1/#Firmware
I cant share this beta version as it is, the beta needs to come from TPLink
- Copy Link
- Report Inappropriate Content
@Ian_D Thank you for the link.
I can only use OpenVPN with my VPN provider. So I'm looking forward to the next update. Possible slow speeds is still better than not working like it is now.
- Copy Link
- Report Inappropriate Content
@Festijn When you say not working, does your vpn client show connected but the clients cant acces the internet?
Just trying to build a picture of what doesnt work for everyone else on the previous firmware
- Copy Link
- Report Inappropriate Content
@Ian_D Yes.
I have exactly the same issue as you described.
- Copy Link
- Report Inappropriate Content
Hi, what is the OpenVPN Server that you wish to connect to, NordVPN, PIA VPN, or something else?
If possible, Could you please send an email to support.forum@tp-link.com with the following information:
1. Can you connect the mobile phone or laptop to the OpenVPN server via the same VPN config file?
2. Can you attach a copy of the OpenVPN config file to the email?
Thank you very much.
Best regards.
Wait for your reply.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 28096
Replies: 175
Voters 5
