AX6000 V2 firmware on V1
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have an Archer AX6000 v1 with very unstable wifi. There hasn't been a firmware update since 2020 for v1 but there has been for the v2 revision. I know typically you can't use the firmware from another device but in some cases you can. For this router, can you?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Different HW versions are usually with different chipset. Uploading FW release for different HW version on a device shouldn't be possible.
If you try to do that, most probably the upgrade procedure will terminate with an error message.
- Copy Link
- Report Inappropriate Content
Hello @Bhjs77
terziyski is right. It's not recommended to install a specific firmware that released for another hardware, which is different from yours, that may cause hardware failure when updating.
The good news is the new official firmware for Archer AX6000 V1 is on the way, and you could be able to check for the updates this week. Please wait and check for the updates on your router later.
Thank you very much for your feedback and patience.
- Copy Link
- Report Inappropriate Content
Hi, that's wonderful news that new FW is coming out for V1. Is there somewhere other than the product page I would find it? The latest firmware I see posted is from 2020 so I'm unsure if it's posted elsewhere or this will be the first update in years.
Is there any suggestions on what fixes it may contain?
- Copy Link
- Report Inappropriate Content
You could also find the official firmware on the product website as below once it's publicly released:
https://www.tp-link.com/support/download/archer-ax6000/v1/#Firmware
Regarding the improvements or fixes, I assume it could be more or less similar to the release note we updated in the following thread for the beta version:
Early Release VPN Client Firmware for Archer AX11000/AX6000 V1
- Copy Link
- Report Inappropriate Content
there is new version 1.30 but once u update u cant go backto your old version mine updated by it self now im stuck with router that drops out and looses wifi TY SO MUCH TPLINK IT IS TRASH UPDATE DONT DO IT
THIS IS THE LINK
- Copy Link
- Report Inappropriate Content
@Coughy I have the same issue since the update. Many devices will connect to the wifi but state they have no internet.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1636
Replies: 6
Voters 0
No one has voted for it yet.