WPA7510 wifi signal strenght drop
Hello,
frequently the strenght of the wifi signal goes weak and my devices connected on it lose the connection.
I have to unplug en re plug it to restart a strenght wifi signal.
Have you a better solution or correction for this issue?
Thank you.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, May I know how long have you had the adapters?
Since TL-WPA7510 is a dual-band adapter, were you having the same issue on both 2.4ghz and 5ghz?
Please also refer to the following suggestions:
1. change the wireless channel and channel width to channel 11+20mhz for 2.4ghz; channel 48+40mhz for 5ghz;
How to customize Powerline ac Extender's wireless settings
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Signal disappeared yesterday on WPA7510 The LEDS were:
all my 3 others PA TP-LINKS run OK, all LED green non red no blink.
Any idea ? I had to unplug and re plug to fix :(
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the message, and sorry for the delay.
Could you please move the WPA7510 closer to one of the PA7010s since the powerline connection seemed disconnected already, or maybe switch the location of the WPA7510 with one of the PA7010s?
Personally, I tend to think the failure of the powerline connection caused the internet loss on wireless devices.
(Since the powerline connection is easily affected by the Home Appliances nearby, if possible, please also move the 7510 far away from the electric devices. such as Microwave ovens and washing machines.)
And I see there is a new firmware for WPA7510: TL-WPA7510(EU)_V2_2.0.3 Build 20220606
It is also suggested to update the firmware of 7510 to see whether it helped or not:
How to update the firmware using tpPLC Utility (new logo)
best regards.
- Copy Link
- Report Inappropriate Content
Hello,
when there are 3 leds on the WPA7510 both of my PA9025 and my 7010 are all green.
The issue is more often present since i've upgraded the lastest firmware. No electric devices near th 7510 either.
thank you for your help
- Copy Link
- Report Inappropriate Content
Hello,
My WPA7510 works worst than before.
Now even al4 led are green and my wireless devices can connect on it there's no internet acces!
My acces with Archer_C7 works fine but nothing on the replicated wifi network via WPA7510.
Everything worked well before (early 2023) but now nothing works.
I think the WPA is dysfunctioning. the lastest firmware is running on it.
please help; is there ny warranty from TP-Link?
thank you
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 401
Replies: 6
Voters 0
No one has voted for it yet.