Home Network Community > Deco > Setup IPTV on satellite deco (deco X55)
< Deco

Setup IPTV on satellite deco (deco X55)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Setup IPTV on satellite deco (deco X55)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Setup IPTV on satellite deco (deco X55)
Setup IPTV on satellite deco (deco X55)
2023-03-04 15:41:57
Tags: #VLAN/IPTV #Backhaul

Hi, I would like to setup mesh environment as above (Ethernet backhaul), and would like to link IPTV on one satellite deco X55.
all devices are connected via cable.
my questions:

1. Is that possible? Will the connection between mesh 2& computer be interrupted due to IPTV mode?
2. If yes, then should mesh 1 be set as router mode, and mesh 2&3 be set as AP mode?

 

thank you in advance 

  0      
 
  0      
 
#1
Options
4 Reply
Re:Setup IPTV on satellite deco (deco X55)
2023-03-06 03:17:44

  @Leo56789 

Hi, welcome to the community.

It is ok to configure IPTV feature on the attached layout.

For more details, please have a look at this link:

How to Configure IPTV function on Deco

The Mesh connection between Deco will not be interrupted due to IPTV mode.

As for the working mode, all three Decos need to be on Wireless router mode.

Best regards.

 

 

Deco X50/X55_V1 Adds Support for Whitelist and MatterI Please leave a message if urgent help is needed.
  0  
  0  
#2
Options
Re:Setup IPTV on satellite deco (deco X55)
2023-03-06 03:51:54

  @David-TP thank you,

just to confirm again that the connection (by Ethernet ) between mesh-2 and computer will not be interrupted due to IPTV?

 

thanks a lot!

  0  
  0  
#3
Options
Re:Setup IPTV on satellite deco (deco X55)
2023-03-06 04:32:47

  @David-TP 

sorry, one additional question, if all mesh (1,2,3) be set as router mode, will it cause multiple subnet issue as each router will try to handle routing?

  0  
  0  
#4
Options
Re:Setup IPTV on satellite deco (deco X55)
2023-03-07 10:09:21 - last edited 2023-03-07 10:11:24

  @Leo56789 

Q1-if all mesh (1,2,3) be set as router mode, will it cause multiple subnet issue as each router will try to handle routing?

No, the main Deco X55 would be the only DHCP server.

 

Q2-the connection (by Ethernet ) between mesh-2 and the computer will not be interrupted due to IPTV?

No, you are allowed to choose a specific Ethernet port as the IPTV port.

best regards.

Deco X50/X55_V1 Adds Support for Whitelist and MatterI Please leave a message if urgent help is needed.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 180

Replies: 4

Tags

VLAN/IPTV Backhaul
About Us
Press
Copyright © TP-Link Corporation Limited. All rights reserved.