Home Network Community > Deco > X50 Outdoor
< Deco

X50 Outdoor

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

X50 Outdoor

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
X50 Outdoor
X50 Outdoor
2023-06-13 14:10:33 - last edited 2023-09-13 02:43:10
Model: Deco X50-Outdoor  
Hardware Version: V1
Firmware Version: 1.0.3

Hello.

Ive installed some x50 outdoors for different customers.

the problem ive seen twice is that the x50 reports offline on the app while its still working and it is green light in reality.

 

the combination in both instances is a M5 with version 1.6.5 as a base connected to another M5 with powerline and other M5's connected wirelessly to the base and the X50 outdoor also wirelessly to the base.

 

the brand of the powerline is dlink(i know about the dlink switxhes)

 

the problem it is that works flawlessly for some days then suddenly it reports offline usually for about 24-48Hrs then starts to report back online.

rebooting from distance the Bases dosnt help, only solution to reboot the x50 by unplugging it.

  2      
 
  2      
 
#1
Options
1 Accepted Solution
Re:X50 Outdoor -Solution
2023-06-30 11:10:56 - last edited 2024-01-19 03:19:37

Update:

[Solution] Deco X50-Outdoor reports offline on the APP while its LED is still green and the internet connection still works fine.

 

This Article Applied to:

Deco X50-Outdoor_V1

 

Phenomenon Description:

Some users might find Deco X50-Outdoor works flawlessly for some days, then suddenly report offline on the APP while it's still working and it is a green light in reality. Usually, a manual restart of Deco X50-Outdoor could make it online on the Deco APP.

 

Solution:

The Official firmware 1.2.3 and above has fixed this issue already. Please make sure your firmware is up-to-date.

 

 

Related Article

Deco X50-Outdoor Won't Reliably Connect to the Mesh after 1.2.1 Firmware Upgrade

Check What's Currently Going on With Deco Deco Early Access Firmware Open for Test! Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#12
Options
18 Reply
Re:X50 Outdoor
2023-06-13 15:40:26

  Same issue here

  2  
  2  
#2
Options
Re:X50 Outdoor
2023-06-13 20:06:56

  @akapal 

Same here but using X60 as main Deco 

 

  2  
  2  
#3
Options
Re:X50 Outdoor
2023-06-14 06:33:15

  @akapal Hi, I would report to the engineers to see whether they could reproduce the same issue.

By the way, have you ever tested for the customers whether the mobile devices were able to get internet service from Deco X50-outdoor when it is offline on the Deco APP?

 

@Lexivienna Nice to see you again and I see your support ticket has been forwarded to the engineers. It would be highly appreciated if you could cooperate with him for further assistance.

 

@PablitoB  Hi, Is your Deco X50-outdoor also wirelessly connected to the main Deco X60?(if via Ethernet cable, Do you use a POE switch? Can I have the model of the switch?)

Could you please help me check the following details as well: whether the mobile devices were able to get internet service from Deco X50-outdoor when it is offline on the Deco APP?

Could you please refer to this link to help me submit the APP log:

How to submit Deco APP log

 

Wait for your reply.

Best regards.

Check What's Currently Going on With Deco Deco Early Access Firmware Open for Test! Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options
Re:X50 Outdoor
2023-06-14 07:10:11

  @David-TP 

 

goodmorning

i cannot be completely sure because i have to rely on the customers answers, but they say they have a normal connection.

the X50 outdoor is powered in both cases via the included power cable.

 

other X50 outdoors without the powerline somewhere else in the network dosnt suffer from this issue.

 

take note that it takes some days for this issue to arrise.

 

thank you

  2  
  2  
#5
Options
Re:X50 Outdoor
2023-06-14 07:46:12

  @David-TP 

 

Hi.

Yes the X50 outdoor is connected via Ethernet through a TP-Link TL-SG1005LP PoE switch connected to an X60, which in turn is connected to the router (Virgin Media Hub 3 in modem mode). Everything remains connected when it is showing off line,I have 28 iot's connected to the outdoor, mostly cameras and tapo smart sockets, nothing drops off the internet connection including the phone. I have checked many times, so the deco remains connected and everything with it but it shows disconnected in the app.

 

Kind regards

David-TP wrote

  @akapal Hi, I would report to the engineers to see whether they could reproduce the same issue.

By the way, have you ever tested for the customers whether the mobile devices were able to get internet service from Deco X50-outdoor when it is offline on the Deco APP?

 

@Lexivienna Nice to see you again and I see your support ticket has been forwarded to the engineers. It would be highly appreciated if you could cooperate with him for further assistance.

 

@PablitoB  Hi, Is your Deco X50-outdoor also wirelessly connected to the main Deco X60?(if via Ethernet cable, Do you use a POE switch? Can I have the model of the switch?)

Could you please help me check the following details as well: whether the mobile devices were able to get internet service from Deco X50-outdoor when it is offline on the Deco APP?

Could you please refer to this link to help me submit the APP log:

How to submit Deco APP log

 

Wait for your reply.

Best regards.

 

  2  
  2  
#6
Options
Re:X50 Outdoor
2023-06-14 08:06:32

@akapal Thanks for the further detailslaugh. We would pay more attention to these details under testing.

 

@PablitoB for your case, It is not like a false alarm on the Deco APP. Could you please help me submit the APP log next time the issue started again:

How to submit Deco APP log

Thank you very much.

Best regards.

Check What's Currently Going on With Deco Deco Early Access Firmware Open for Test! Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  1  
  1  
#7
Options
Re:X50 Outdoor
2023-06-20 11:33:58

  @David-TP 

deco

when we will have a solution for this?

as you see in the picture all the deco units are connected with good signal from the outdoor unit

  0  
  0  
#8
Options
Re:X50 Outdoor
2023-06-20 22:38:34 - last edited 2023-06-20 22:45:54

My deco x50-outdoor Ver. 1.0.1 build 20230105

 

Exactly the same problem with x50-outdoor. disappears from the deco application after 24-48 hours. while continuing to work. Connected via poe. There are also 3 points x20 in the network. I went to the point through the web interface, these are the errors in the logs.

 

 

Tue Jun 20 02:00:48 2023 daemon.err /usr/bin/apsd: apsd_check_eth_has_neigh:1100: Error: can't find ifname[eth1.591] in eth_ifname Tue Jun 20 02:00:49 2023 daemon.err /usr/bin/apsd: apsd_check_eth_has_neigh:1100: Error: can't find ifname[eth1.591] in eth_ifname Tue Jun 20 02:00:51 2023 daemon.err /usr/bin/apsd: apsd_check_eth_has_neigh:1100: Error: can't find ifname[eth1.591] in eth_ifname Tue Jun 20 02:00:52 2023 daemon.err /usr/bin/apsd: apsd_check_eth_has_neigh:1100: Error: can't find ifname[eth1.591] in eth_ifname Tue Jun 20 02:00:53 2023 daemon.err /usr/bin/apsd: apsd_check_eth_has_neigh:1100: Error: can't find ifname[eth1.591] in eth_ifname Tue Jun 20 02:00:54 2023 daemon.err /usr/bin/apsd: apsd_check_eth_has_neigh:1100: Error: can't find ifname[eth1.591] in eth_ifname Tue Jun 20 02:00:55 2023 daemon.err /usr/bin/apsd: apsd_check_eth_has_neigh:1100: Error: can't find ifname[eth1.591] in eth_ifname Tue Jun 20 02:00:56 2023 daemon.err tmpsvr[5842]: Error: memfree less than 10000 KB Tue Jun 20 02:00:56 2023 daemon.err tmpsvr[5842]: Error: tdp_trans_relay Tue Jun 20 02:00:56 2023 daemon.err tmpsvr[5842]: Error: memfree less than 10000 KB Tue Jun 20 02:00:56 2023 daemon.err tmpsvr[5842]: Error: tdp_trans_relay Tue Jun 20 02:00:56 2023 daemon.err tmpsvr[5842]: Error: CGI produced less bytes than expected Tue Jun 20 02:00:56 2023 daemon.err tmpsvr[5842]: Error: CGI produced less bytes than expected Tue Jun 20 02:00:56 2023 daemon.err /usr/bin/apsd: apsd_check_eth_has_neigh:1100: Error: can't find ifname[eth1.591] in eth_ifname Tue Jun 20 02:00:56 2023 daemon.err tmpsvr[5842]: Error: memfree less than 10000 KB Tue Jun 20 02:00:56 2023 daemon.err tmpsvr[5842]: Error: ERROR tdp_trans_relay Tue Jun 20 02:00:56 2023 daemon.err tmpsvr[5842]: Error: memfree less than 10000 KB Tue Jun 20 02:00:56 2023 daemon.err tmpsvr[5842]: Error: ERROR tdp_trans_relay Tue Jun 20 02:00:58 2023 daemon.err /usr/bin/apsd: apsd_check_eth_has_neigh:1100: Error: can't find ifname[eth1.591] in eth_ifname

  0  
  0  
#9
Options
Re:X50 Outdoor
2023-06-24 03:55:45

  @akapal 

another customer x50 outdoor saying disconnected, this one is powered by poe and dosnt have any powerline in the network, without it none satellite would work so obviously once again this unit is working right now but reports offline!!

 

 

  0  
  0  
#10
Options
Re:X50 Outdoor
2023-06-29 13:53:16

  @David-TP 

another hard wired x50 outdoor same problem, i asked many times about a fix or update? already sent screenshots and logs, any news?

thats something affecting obviously thousands and have no feedback yet!

 

 

 

  3  
  3  
#11
Options
12

Information

Helpful: 2

Views: 2492

Replies: 18

Related Articles
X50 outdoor offline
1581 1
X50 outdoor PoE issue
569 0
Deco X50-Outdoor firmware
1223 2
Mounting Deco X50 Outdoor
81 0
Deco X50 Outdoor no IoT network
841 3
Deco X50-Outdoor: Connectivity Issues
435 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.