Home Network Community > Deco > Unable to update X55
< Deco

Unable to update X55

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Unable to update X55

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Unable to update X55
Unable to update X55
2023-06-23 05:25:31 - last edited 2023-06-26 08:23:18
Tags: #Firmware Update
Model: Deco X55  
Hardware Version: V1
Firmware Version: 1.0.0 Build 20220407 Rel. 70443

Hey,

 

I've bought a pair of Deco X55s as I was having constant issues with my old M4s.

 

I deleted the old network and setup the new one and everything seems fine, except I am unable to install updates. I check for updates and I get a notification that version 1.2.6 is available, I click install, it says installation is successful and when I check again the routers are still running the old firmware and it still asks me to update to 1.2.6. I've done this 4 or 5 times by now with no luck. I've tried rebooting everything and it did not help.

 

Even though I had issues with my old Decos I still decided to give TP-Link another chance but I'm starting to think that was a costly mistake. Seems like TP-Link firmware quality has really gone down the drain recently, really disappointed.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Unable to update X55-Solution
2023-06-26 01:39:23 - last edited 2023-06-26 08:23:18

I should add: after I upgraded to 1.2.5 via the web interface with the .bin file, I was *then* able to successfully upgrade to 1.2.6 Build 20230518 Rel. 60781, via the mobile app. This time there really *was* a reboot sequence etc and the correct version is shown afterward.

So, it seems the older version could not update to 1.2.5 via the usual way, and had to be done manually, in order to then get 'proper' updates via the app to work from here on in (crossed fingers)

 

This despite the fact that the 1.2.6 is still not visible on the website as far as I can tell (at https://www.tp-link.com/au/support/download/deco-x55/#Firmware)

Recommended Solution
  5  
  5  
#6
Options
5 Reply
Re:Unable to update X55
2023-06-23 11:58:48

 I have the same issue (and same model) as @nickbg321 - this is my first set of Decos, X55 bought today.


They are on firmware 1.0.8 Build 20220407 Rel. 69584

 

I get prompted to step through the upgrade to 1.2.6 Build 20230518 Rel. 60781 and it claims it installs, reboots, all a great success yet the Decos are on the same version as before, and still have the prompt to upgrade. Tried about 6 times.

 

Presumably the firmware installation is actually failing but the app can't surface the error properly. Hope a future update sorts it out !

  3  
  3  
#2
Options
Re:Unable to update X55
2023-06-23 12:13:19

  @mig5 I finally managed to update them by manually uploading the firmware file in the web interface. Interestingly the latest firmware available on the support page for the EU model is 1.2.2 (which is what I ended up installing), and not 1.2.6. 

 

These sort of issues shouldn't be happening on a brand new system, let alone on one that costs as much as this. Is this stuff even tested before being rolled out?

  1  
  1  
#3
Options
Re:Unable to update X55
2023-06-24 06:32:31

  @nickbg321 thanks for that tip, which led me to being able to upload 1.2.5 Build 20230511 Ref 67294 (US version, which seems to be what is available for AU consumers such as myself)
 

The 1.2.6 I don't even see on the firmware page on their site, so it seems something is up indeed with that version. Bit weird.

No issues so far on 1.2.5 at least, which is a relief given what I've read of other firmware updates on this forum.

  3  
  3  
#4
Options
Re:Unable to update X55
2023-06-25 09:44:10

  @nickbg321 @mig5 

Thank you very much for the feedback.

The case has been reported to the senior engineers and once there is further news, I will update here as soon as possible.

Thanks again.

Best regards.

 

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us!
  0  
  0  
#5
Options
Re:Unable to update X55-Solution
2023-06-26 01:39:23 - last edited 2023-06-26 08:23:18

I should add: after I upgraded to 1.2.5 via the web interface with the .bin file, I was *then* able to successfully upgrade to 1.2.6 Build 20230518 Rel. 60781, via the mobile app. This time there really *was* a reboot sequence etc and the correct version is shown afterward.

So, it seems the older version could not update to 1.2.5 via the usual way, and had to be done manually, in order to then get 'proper' updates via the app to work from here on in (crossed fingers)

 

This despite the fact that the 1.2.6 is still not visible on the website as far as I can tell (at https://www.tp-link.com/au/support/download/deco-x55/#Firmware)

Recommended Solution
  5  
  5  
#6
Options

Information

Helpful: 0

Views: 513

Replies: 5

Tags

Firmware Update
Related Articles
X55 WiFi Speed dropped 90% after Firmware upgrade to: 1.5.0 Build 20240311 Rel. 66190
113 0
No internet after firmware update X55- Deco X55(US)_V1.6_1.4.1 Build 20231122
241 1
X55 after firmware update has bad performance
461 0
unable to update TL-WR841N_V9_150310
709 0
X55 Firmware Update Connection Preference No Longer Works
299 1
Deco M5 Unable to register and unable to update antivirus
1069 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.