TP-Link Community > Tapo Robot Vacuum > Getting this constantly "The device is tilting. Please put it on the level ground"
< Tapo Robot Vacuum

Getting this constantly "The device is tilting. Please put it on the level ground"

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Getting this constantly "The device is tilting. Please put it on the level ground"

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Getting this constantly "The device is tilting. Please put it on the level ground"
Getting this constantly "The device is tilting. Please put it on the level ground"
2023-09-11 14:29:42 - last edited 2024-01-09 02:06:48
Model: Tapo RV30 Plus  
Hardware Version: V1
Firmware Version:

I bought the robot a few days ago and can't figure out why it is showing this error. I have tried a few factory resets, but nothing seems to work. 

 

It is on the ground level, but when I try to start it for mapping, it says "The device is tilting. Please put it on the level ground". 

 

Any idea ? 

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Getting this constantly "The device is tilting. Please put it on the level ground"-Solution
2023-09-13 03:24:19 - last edited 2024-01-09 02:06:48

  @AlexAnto 

 

Place the robot on the level surface and power cycle the device by switching the side ON/OFF switch. 

 

Before hearing the voice prompt and completing of startup, please keep the machine placed on a flat surface without tilting or moving it. 

 

Then try to start mapping again, let me know if it helps. 

 

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.
Recommended Solution
  0  
  0  
#4
Options
Re:Getting this constantly "The device is tilting. Please put it on the level ground"-Solution
2024-01-09 09:07:00 - last edited 2024-01-12 01:07:53

  @Chiara_Bales 
After 2 weeks of constant communication with the TPLink Technical Team, and a few debugging hours, they found out the gyroscope inside the device was faulty. So, the solution was to return the product back to the store. 

 

If you get the error constantly regardless if you reset it a few times and try on different surfaces, it might be the same issue. 

 

Thanks

Recommended Solution
  3  
  3  
#9
Options
8 Reply
Re:Getting this constantly "The device is tilting. Please put it on the level ground"
2023-09-12 10:08:24

  @AlexAnto 

 

Can you share a picture of the error here? Please also take a picture of the robot where the dock is located.

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.
  0  
  0  
#2
Options
Re:Getting this constantly "The device is tilting. Please put it on the level ground"
2023-09-12 11:54:47

  @Wayne-TP 
I've attached a screenshot with the error and also with the robot next to the dock. I was also trying to show there is no tilting and I have also tried to move on other side of the house on a different floor. 
 

 

  0  
  0  
#3
Options
Re:Getting this constantly "The device is tilting. Please put it on the level ground"-Solution
2023-09-13 03:24:19 - last edited 2024-01-09 02:06:48

  @AlexAnto 

 

Place the robot on the level surface and power cycle the device by switching the side ON/OFF switch. 

 

Before hearing the voice prompt and completing of startup, please keep the machine placed on a flat surface without tilting or moving it. 

 

Then try to start mapping again, let me know if it helps. 

 

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.
Recommended Solution
  0  
  0  
#4
Options
Re:Getting this constantly "The device is tilting. Please put it on the level ground"
2023-09-13 06:20:51

  @Wayne-TP 

 

Thanks for your help, but I am a few steps ahead. 

 

Also contacted Support and they still can't figure it out what is wrong with it. 

 

  0  
  0  
#5
Options
Re:Getting this constantly "The device is tilting. Please put it on the level ground"
2023-09-13 08:37:38

  @AlexAnto 

 

Thank you for your update. I'll help to remind the support engineer to handle your case. 

 

If there is any progress or resolution regarding this issue, please update the information here. This will provide references for other users who may encounter the same problem.

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.
  0  
  0  
#6
Options
Re:Getting this constantly "The device is tilting. Please put it on the level ground"
2024-01-05 07:51:08

 @AlexAnto 

Hello, Please can you advise if you have managed to resolve this issue. We have the exact same error.

Wayne-TP wrote

  @AlexAnto 

 

Thank you for your update. I'll help to remind the support engineer to handle your case. 

 

If there is any progress or resolution regarding this issue, please update the information here. This will provide references for other users who may encounter the same problem.

 

 

 

 

  0  
  0  
#7
Options
Re:Getting this constantly "The device is tilting. Please put it on the level ground"
2024-01-09 06:10:49

  @Chiara_Bales 

 

Please try out the suggestions in the "Recommended Solution" in this thread and see if they help you.

 

To better help with this case, we would like to forward your case to the tech team, and they will help follow it up, if you are willing to do further analysis, please check your inbox later and respond.    

 

 

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.
  0  
  0  
#8
Options
Re:Getting this constantly "The device is tilting. Please put it on the level ground"-Solution
2024-01-09 09:07:00 - last edited 2024-01-12 01:07:53

  @Chiara_Bales 
After 2 weeks of constant communication with the TPLink Technical Team, and a few debugging hours, they found out the gyroscope inside the device was faulty. So, the solution was to return the product back to the store. 

 

If you get the error constantly regardless if you reset it a few times and try on different surfaces, it might be the same issue. 

 

Thanks

Recommended Solution
  3  
  3  
#9
Options

Information

Helpful: 0

Views: 2751

Replies: 8

Related Articles
New TC 72 not tilting up down
255 0
 my tapo c200 side tilting (360) had been stopped where as vertical tilting is Working fine
2101 0
Getting "This device is no longer associated with its previous account" with my Tapo camera
335 2
 Tapo camera disconnecting network while tilting camera
303 0
HS220 constantly disconnect from wifi
776 0
C210 video constantly freezing
93 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.