AC1200 Deco E4 setup problem
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AC1200 Deco E4 setup problem
During the setup procedure on the app the deco unit cannot be found and yet in my phonsettings the Wi-Fi is connected to the deco unit.
1 Accepted Solution
Re:AC1200 Deco E4 setup problem -Solution
Hi, here are some suggestions for your reference:
1. Confirm the Deco is still blinking blue.
2. Disable VPN service if there is any.
3. Enable "Location" and "Local Network" for the Deco APP on the smartphone if you are using an iPhone.
Wait for your reply and best regards.
▶Check What's Currently Going on With Deco
▶Deco BE11000/ BE63_V2.6_1.1.7 Ready for Test
▶Deco BE25_V1_1.0.17 Ready for Test!
▶Update Deco BE65 Pro to the Latest 1.1.3 Firmware Now!
Try to leave a Message if urgent help is required.
Re:AC1200 Deco E4 setup problem -Solution
Hi, here are some suggestions for your reference:
1. Confirm the Deco is still blinking blue.
2. Disable VPN service if there is any.
3. Enable "Location" and "Local Network" for the Deco APP on the smartphone if you are using an iPhone.
Wait for your reply and best regards.
▶Check What's Currently Going on With Deco
▶Deco BE11000/ BE63_V2.6_1.1.7 Ready for Test
▶Deco BE25_V1_1.0.17 Ready for Test!
▶Update Deco BE65 Pro to the Latest 1.1.3 Firmware Now!
Try to leave a Message if urgent help is required.