Solved-Archer AX73 V1&V2 might reboot automatically when working together with some Range Extenders

Solved-Archer AX73 V1&V2 might reboot automatically when working together with some Range Extenders

68 Reply
Re:Archer AX73 V2 might reboot automatically when working together with some Range Extenders
2023-12-11 01:43:17

  @malclarke @Reibeiro @Atlis 

 

Thanks a lot for all the feedbacks, glad to hear that the problem has been resolved.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  1  
  1  
#44
Options
Re:Archer AX73 V2 might reboot automatically when working together with some Range Extenders
2023-12-14 13:07:22

  @TINZ 

 

As an update, I have now had a solid internet connection for over 2 days:  AX73 V1

What I did was the following:

Disconnect the RE550 (which was the farthest location from the base router – about 100ft) and replace with an ethernet backhaul TP-link router.

 

I believe the issue was that the RE550 was so far away that although it connected, it was creating stress on the new easymesh network somehow and caused it to reboot.

  0  
  0  
#45
Options
Re:Archer AX73 V2 might reboot automatically when working together with some Range Extenders
2023-12-14 19:23:16

  @Liam_T 

Thanks a lot.

 

For my case, AX73 after last random reboot. AX73 online for 2 days. I do everything as usual. I don't understand now. 

But if AX73 reboot again. I will find new location for range extender.

  0  
  0  
#46
Options
Re:Archer AX73 V1&V2 might reboot automatically when working together with some Range Extenders
2024-01-25 23:05:08 - last edited 2024-01-25 23:17:30

Archer AX73 V1, using Archer C80 as sattelite device in EasyMesh netwrok, even after updating to the beta version it keeps restarting even more often I feel like.

Firmware Version :
1.3.5 Build 20231213 rel.71357(4555)
Hardware Version :
Archer AX73 v1.0
  0  
  0  
#47
Options
Re:Archer AX73 V1&V2 might reboot automatically when working together with some Range Extenders
2024-01-26 00:59:43

  @YourLocalArisa 

 

Hi, may I know how often it happens now? and are you using Ethernet backhaul or wireless backhaul to build the EasyMesh network?

Please also let us know how many client devices are usually connected and what are they.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#48
Options
Re:Archer AX73 V1&V2 might reboot automatically when working together with some Range Extenders
2024-01-26 12:18:22

  @Sunshine 

 

It happens at least every 12 hours, sometimes it restarts multiple times in row, like 10 minutes inbetween, sometimes it restarts after 7 hours running, etc.. I am using Ethernet to connect them, around 5 clients connected on the Archer C80 and 5 on the Archer AX73 V1, Archer 73 V1 clients are (Wifi: Smart TV, One laptop, two mobiles) (Ethernet:1 Desktop, one of the laptops always uses Ethernet) I also use simple Netgear switch inbetween my room and the router.

Archer C80 clients are (Wifi: Mobile, Two IoT devices, Chromecast) (Ethernet: Desktop)

  0  
  0  
#49
Options
Re:Archer AX73 V1&V2 might reboot automatically when working together with some Range Extenders
2024-01-29 03:31:10

  @YourLocalArisa 

 

Thanks a lot for those information, we've seen your new thread and has forwarded your case to senior engineer for debugging via email.

https://community.tp-link.com/en/home/forum/topic/653028?replyId=1312742

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#50
Options
Re:Archer AX73 V1&V2 might reboot automatically when working together with some Range Extenders
2024-03-11 18:14:54

  @Sunshine I have the same problem with my AX5400 connected with RE505X

 

2024-03-11 19:05:51 Led Controller INFO [1192] Start to run WAN1_ON

2024-03-11 19:05:51 Led Controller INFO [1192] Start to run WAN0_OFF

2024-03-11 19:05:51 Led Controller INFO [1192] Start to run LAN_ON

2024-03-11 19:05:46 Time Settings INFO [17978] Service restart

2024-03-11 19:05:44 Led Controller INFO [1192] Start to run WAN1_ON

2024-03-11 19:05:44 Led Controller INFO [1192] Start to run WAN0_OFF

2024-03-11 19:05:44 Led Controller INFO [1192] Start to run LAN_ON

2024-03-11 19:05:15 UPnP INFO [14684] Service start

2024-03-11 19:05:15 UPnP INFO [14684] Service stop

2024-03-11 19:05:11 Remote Management INFO [13774] Service stop

2024-03-11 19:05:02 Time Settings INFO [12892] Service restart

2024-03-11 19:05:01 NAT INFO [11520] IPSEC ALG enabled

2024-03-11 19:05:01 NAT INFO [11520] L2TP ALG enabled

2024-03-11 19:05:01 NAT INFO [11520] PPTP ALG enabled

2024-03-11 19:05:01 NAT INFO [11520] SIP ALG enabled

2024-03-11 19:05:01 NAT INFO [11520] RTSP ALG enabled

2024-03-11 19:05:01 NAT INFO [11520] H323 ALG enabled

2024-03-11 19:05:01 NAT INFO [11520] TFTP ALG enabled

2024-03-11 19:05:01 NAT INFO [11520] FTP ALG enabled

2024-03-11 19:04:57 3G4G DEBUG [1613] backup: switch network to WIRED.

2024-03-11 19:04:57 NAT INFO [11520] Initialization succeeded

2023-09-19 00:00:53 NAT INFO [11520] Initialization succeeded

2023-09-19 00:00:51 3G4G DEBUG [1613] backup: switch network to WIRED.

2023-09-19 00:00:50 Led Controller INFO [1192] Start to run WAN1_OFF

2023-09-19 00:00:50 Led Controller INFO [1192] Start to run WAN0_ON

2023-09-19 00:00:50 Led Controller INFO [1192] Start to run LAN_ON

2023-09-19 00:00:48 Led Controller INFO [1192] Start to run STATUS_ON

2023-09-19 00:00:47 QoS INFO [10956] Service start

2023-09-19 00:00:47 QoS INFO [10956] Function disabled

2023-09-19 00:00:46 Led Controller INFO [1192] Start to run GENERAL

2023-09-19 00:00:40 Traffic Statistics INFO [9536] Service start

2023-09-19 00:00:29 Factory Reset INFO [7367] Service start

2023-09-19 00:00:27 Parental Controls INFO [7000] Service start

2023-09-19 00:00:27 Parental Controls INFO [7000] Function enabled

2023-09-19 00:00:26 Access Control INFO [6860] Service start

2023-09-19 00:00:26 Access Control INFO [6860] Function disabled

2023-09-19 00:00:24 NAT DEBUG [6075] Flush conntrack

2023-09-19 00:00:24 NAT INFO [6075] Function enabled

2023-09-19 00:00:24 NAT NOTICE [6075] Create NAT chain succeeded

2023-09-19 00:00:22 NAT INFO [6075] Initialization succeeded

2023-09-19 00:00:21 NAT INFO [6075] Initialization succeeded

2023-09-19 00:00:21 Basic Security INFO [5772] Service start

2023-09-19 00:00:21 Basic Security NOTICE [5772] Flush conntrack table succeeded

2023-09-19 00:00:19 Firewall INFO [4467] Service start

2023-09-19 00:00:17 IP & MAC Binding INFO [5464] Daemon connection succeeded

2023-09-19 00:00:17 IP & MAC Binding INFO [5464] ARP Binding disabled

2023-09-19 00:00:17 IP & MAC Binding INFO [5464] Config interface initialization succeeded

2023-09-19 00:00:17 IP & MAC Binding INFO [5464] Initialization succeeded

2023-09-19 00:00:16 UPnP INFO [5203] Service start

2023-09-19 00:00:16 UPnP INFO [5203] Service stop

2023-09-19 00:00:15 Led Controller ERROR [1192] Config importing failed

2023-09-19 00:00:15 Led Controller DEBUG [1192] Failed to read _ON

2023-09-19 00:00:14 Led Controller ERROR [1192] Config importing failed

2023-09-19 00:00:14 Led Controller DEBUG [1192] Failed to read _ON

2023-09-19 00:00:13 Remote Management INFO [4674] Service stop

2023-09-19 00:00:12 Led Controller ERROR [1192] Config importing failed

2023-09-19 00:00:12 Led Controller DEBUG [1192] Failed to read _ON

2023-09-19 00:00:11 Led Controller INFO [1192] Start to run WIFI2G_ON

2023-09-19 00:00:11 Led Controller INFO [1192] Start to run WIFI5G_ON

2023-09-19 00:00:11 Led Controller ERROR [1192] Config importing failed

2023-09-19 00:00:11 Led Controller DEBUG [1192] Failed to read _ON

2023-09-19 00:00:11 Led Controller ERROR [1192] Config importing failed

2023-09-19 00:00:11 Led Controller DEBUG [1192] Failed to read _ON

2023-09-19 00:00:10 Led Controller ERROR [1192] Config importing failed

2023-09-19 00:00:10 Led Controller DEBUG [1192] Failed to read _ON

2023-09-19 00:00:10 Led Controller ERROR [1192] Config importing failed

2023-09-19 00:00:10 Led Controller DEBUG [1192] Failed to read _ON

2023-09-19 00:00:09 Led Controller ERROR [1192] Config importing failed

2023-09-19 00:00:09 Led Controller DEBUG [1192] Failed to read _ON

2023-09-19 00:00:09 Led Controller ERROR [1192] Config importing failed

2023-09-19 00:00:09 Led Controller DEBUG [1192] Failed to read _ON

2023-09-19 00:00:08 Led Controller ERROR [1192] Config importing failed

2023-09-19 00:00:08 Led Controller DEBUG [1192] Failed to read _ON

2023-09-19 00:00:08 Led Controller ERROR [1192] Config importing failed

2023-09-19 00:00:08 Led Controller DEBUG [1192] Failed to read _ON

2023-09-19 00:00:07 Led Controller ERROR [1192] Config importing failed

2023-09-19 00:00:07 Led Controller DEBUG [1192] Failed to read _ON

2023-09-19 00:00:07 Led Controller ERROR [1192] Config importing failed

2023-09-19 00:00:07 Led Controller DEBUG [1192] Failed to read _ON

2023-09-19 00:00:00 Time Settings INFO [1232] Service start

1970-01-01 00:00:20 Led Controller INFO [1192] Service start

  0  
  0  
#51
Options
Re:Archer AX73 V1&V2 might reboot automatically when working together with some Range Extenders
2024-03-13 00:57:30

  @3ehu 

 

Hi, for different models, please refer to this thread for troubleshooting first: What can I do if my Router keeps Rebooting randomly?

If the problem still exists, please start a new thread to provide the detailed network topology and client devices as well.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#52
Options
Re:Archer AX73 V1&V2 might reboot automatically when working together with some Range Extenders
2024-03-29 07:38:17 - last edited 2024-03-29 07:38:41

  @Sunshine 

Hi, 

Same issue here Archer AX73 V1 1.3.5 Build 20230919 rel.12938(4555) in EasyMesh with RE550 with wireless backhaul.

Sometimes it's rebooting multiple times a day. I have around 25 devices- light bulbs, relays, motion sensors, phones, laptops, tablets and TVs. 1 wired connection to the AX73 (Raspberry Pi 5) and 1 wired connection to the RE550 (Chromecast with Google TV). On the AX I have 6 open ports (port forwarding) for WireGuard VPN, NGINX, Plex and one another app.

Will try now how it will be without the RE550 and if the random reboots will continue.

 

Log from last reboot:

 

2024-03-29 07:53:06 Led Controller INFO [1167] Start to run WAN1_ON
2024-03-29 07:53:06 Led Controller INFO [1167] Start to run WAN0_OFF
2024-03-29 07:53:06 Led Controller INFO [1167] Start to run LAN_ON
2024-03-29 07:53:00 Led Controller INFO [1167] Start to run WAN1_ON
2024-03-29 07:53:00 Led Controller INFO [1167] Start to run WAN0_OFF
2024-03-29 07:53:00 Led Controller INFO [1167] Start to run LAN_ON
2024-03-29 07:52:28 UPnP INFO [15715] Service start
2024-03-29 07:52:27 UPnP INFO [15715] Service stop
2024-03-29 07:52:25 Remote Management INFO [15401] Service stop
2024-03-29 07:52:20 NAT INFO [12651] IPSEC ALG enabled
2024-03-29 07:52:20 NAT INFO [12651] L2TP ALG enabled
2024-03-29 07:52:20 NAT INFO [12651] PPTP ALG enabled
2024-03-29 07:52:20 NAT INFO [12651] SIP ALG disabled
2024-03-29 07:52:20 NAT INFO [12651] RTSP ALG disabled
2024-03-29 07:52:20 NAT INFO [12651] H323 ALG disabled
2024-03-29 07:52:20 NAT INFO [12651] TFTP ALG disabled
2024-03-29 07:52:19 NAT INFO [12651] FTP ALG disabled
2024-03-29 07:52:18 NAT NOTICE [12651] Virtual server created succeeded[ex-port:443 ip:192.168.0.3 in-port:443 protocol:tcp]
2024-03-29 07:52:18 NAT NOTICE [12651] Virtual server created succeeded[ex-port:80 ip:192.168.0.3 in-port:80 protocol:all]
2024-03-29 07:52:17 NAT NOTICE [12651] Virtual server created succeeded[ex-port:32400 ip:192.168.0.3 in-port:32400 protocol:all]
2024-03-29 07:52:17 NAT NOTICE [12651] Virtual server created succeeded[ex-port:59595 ip:192.168.0.3 in-port:59595 protocol:all]
2024-03-29 07:52:16 NAT NOTICE [12651] Virtual server created succeeded[ex-port:6882 ip:192.168.0.3 in-port:6882 protocol:all]
2024-03-29 07:52:16 NAT NOTICE [12651] Virtual server created succeeded[ex-port:51820 ip:192.168.0.3 in-port:51820 protocol:udp]
2024-03-29 07:52:12 NAT INFO [12651] Initialization succeeded
2024-03-29 07:52:12 NAT INFO [12651] Initialization succeeded

 

  0  
  0  
#53
Options