Business Community > Routers > ER707-M2 -> Internet Wan Off-line. (HW-upgrade from ER605-V2 to ER707-M2)
< Routers

ER707-M2 -> Internet Wan Off-line. (HW-upgrade from ER605-V2 to ER707-M2)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER707-M2 -> Internet Wan Off-line. (HW-upgrade from ER605-V2 to ER707-M2)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER707-M2 -> Internet Wan Off-line. (HW-upgrade from ER605-V2 to ER707-M2)
ER707-M2 -> Internet Wan Off-line. (HW-upgrade from ER605-V2 to ER707-M2)
2023-10-22 16:34:31 - last edited 2023-10-27 08:30:38
Tags: #WAN Setup #Network Connectivity #Controller Related
Model: ER707-M2  
Hardware Version: V1
Firmware Version: Version 1.1.0

Can not get the Internet / Wan connection up and running  with the ER707-M2 after HW upgrade from ER605-V2

I use an OC300 ( Latest Firmware)

 

1) ER605V2 -> Function ok. 

 

2) ER605V2 -> Forget device

 

3) ER707M2 -> install and Power on

4) Wired Network ->  changed gateway model to ER707-M2 , configure the WAN

5) Adopt  ER707-M2 (Signal led  for the RJ45 lines ok)

6) ER707-M2 Connected  but WAN Off Line ->  even after manual start stays off line.

     Same problem for WAN1 /WAN2 / WAN3

7) High Rate of errors logged ->  all related to  ISP-connection that is not available IP / DNS  ...

 

Function not ok and go back to original HW-configuration with ER605-V2

 

8) ER707-M2 Forget Device.


9) Wired Network ->  changed gateway model to ER605-V2 , configure the WAN

10)  Adopt  ER605-V2 (Signal led  for the RJ45 lines ok)

11) Everything ok. No problem,  function as defined before.

12) ER605V2 up an running

 

 Any feedback is welcome 

 

Benny.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:ER707-M2 -> Internet Wan Off-line. (HW-upgrade from ER605-V2 to ER707-M2)-Solution
2023-10-24 02:08:24 - last edited 2023-10-27 08:30:38

Hi @BennyCS 

Thanks for posting in our business forum.

Have you ever thought about the MAC clone? If it is your ISP limits the MAC address? Call them and release the MAC address can also fix the issue.

I don't think it's a problem ever with the manufacturers of any networking devices.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Beta firmware got some NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
Recommended Solution
  0  
  0  
#4
Options
4 Reply
Re:ER707-M2 -> Internet Wan Off-line. (HW-upgrade from ER605-V2 to ER707-M2)
2023-10-22 23:43:44
Following. Just got 2gig internet and I am about to go through the same process. Picking up the ER707-M2 tomorrow.
  0  
  0  
#2
Options
Re:ER707-M2 -> Internet Wan Off-line. (HW-upgrade from ER605-V2 to ER707-M2)
2023-10-23 09:49:07

  @BennyCS And which port do you use as a WAN? And please, what do you say in terms of processor power and RAM, it works much faster? How about downloading the device? not as 10minutes as R605?

  0  
  0  
#3
Options
Re:ER707-M2 -> Internet Wan Off-line. (HW-upgrade from ER605-V2 to ER707-M2)-Solution
2023-10-24 02:08:24 - last edited 2023-10-27 08:30:38

Hi @BennyCS 

Thanks for posting in our business forum.

Have you ever thought about the MAC clone? If it is your ISP limits the MAC address? Call them and release the MAC address can also fix the issue.

I don't think it's a problem ever with the manufacturers of any networking devices.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Beta firmware got some NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
Recommended Solution
  0  
  0  
#4
Options
Re:ER707-M2 -> Internet Wan Off-line. (HW-upgrade from ER605-V2 to ER707-M2)
2023-10-24 17:25:41 - last edited 2023-11-04 09:11:45

Thanks Clive, I think your correct it is the MAC address that gives me trouble need to change it in my Modem setting. IT refers at this moment to my ER605 MAC Address and need to refer to my ER707 MAC Address. Will try this in a few days. "Your hint dropped the coin". Thanks Benny.

 

F.Y.I.

 

Equipment MAC-address  +  Wan-portnr  = correct Mac ID   

xx : xx : xx : xx : xx : 84     +  1                  = xx : xx : xx : xx : xx : 85 

 

  1  
  1  
#5
Options

Information

Helpful: 0

Views: 543

Replies: 4

Tags

WAN Setup Network Connectivity Controller Related
Related Articles
Internet down after upgrading ER707-M2 (v1) to version 1.2.0
768 0
ER707-M2 always uses backup link
205 0
ER707-M2 Question
389 0
Current status of IPv6 integration ER707-M2
193 0
ER707-M2 cannot login to gateway (first configuration)
1027 0
ER707 M2 usability in omada and what sfp's can be used
301 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.