ESP8266 won't connect to WiFi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ESP8266 won't connect to WiFi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ESP8266 won't connect to WiFi
ESP8266 won't connect to WiFi
2023-11-30 17:51:44
Model: Archer VR2800  
Hardware Version: V1
Firmware Version: 0.8.0 0.9.1 v006c.0 Build 220512 Rel.41022n

I have a number of ESP8266 devices around the house, some with my own code (Arduino IDE), some with Tasmota and some with ESPHome. I've noticed that since I did a firmware upgrade a few weeks ago some will not connect to WiFi. If I reboot (power cycle) the VR2800 then they will connect and stay good unless I power cycle them!

They all work on the 2.4GHz band, I have WPA/WPA2 Personal (Recommended) security and Version & Encryption are set to Auto (they were WPA-PSK and AES but I read on another thread that Auto might help - I hasn't).

Any thoughts?

 

  0      
  0      
#1
Options
2 Reply
Re:ESP8266 won't connect to WiFi
2023-12-01 01:23:16

  @Graham307 

 

What you can do to confirm a firmware issue is to go back to your original wireless security and encryption settings.

Revert to the previous FW release and check if everything works as it was before upgrading the router FW.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#2
Options
Re:ESP8266 won't connect to WiFi
2023-12-05 21:28:48

  @terziyski I did just that today and so far one of the ESPs that had the issue connected and has stayed connected for around 12 hours now. Another is not, so mixed success. More time will tell.

  0  
  0  
#3
Options