Business Community > Cameras > How to Configure the Transmission of the Vigi NVR1016H and the Vigi C 340-W Cameras.
< Cameras

How to Configure the Transmission of the Vigi NVR1016H and the Vigi C 340-W Cameras.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to Configure the Transmission of the Vigi NVR1016H and the Vigi C 340-W Cameras.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to Configure the Transmission of the Vigi NVR1016H and the Vigi C 340-W Cameras.
How to Configure the Transmission of the Vigi NVR1016H and the Vigi C 340-W Cameras.
2023-12-06 12:24:14 - last edited 2024-02-20 08:53:59
Tags: #VIGI NVR #VIGI Camera #Installation #Network Connectivity
Model: VIGI NVR1016H   VIGI C340-W  
Hardware Version: V12
Firmware Version: V 1.20

Greetings, When trying to connect several cameras to this NVR, at times some cameras stop being seen and the following message appears. Close some channels or configure transmission. To do this, go to the transmission configuration menu. How to solve it since transmission does not appear in the configuration menu.

Thank you.

 

  0      
 
  0      
 
#1
Options
1 Reply
Re:How to Configure the Transmission of the Vigi NVR1016H and the Vigi C 340-W Cameras.
2023-12-07 08:57:36

Hi @Geowanny 

Thanks for posting in our business forum.

Can you give a screenshot of this issue? That would help clear the puzzle here. I am not certain about the issue you described.

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 739

Replies: 1

Tags

VIGI NVR VIGI Camera Installation Network Connectivity
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.